Bearings and Accessories

Where to obtain materials and tools that I use
Suso
Posts: 876
Joined: Thu Oct 22, 2015 4:51 pm

Bearings and Accessories

Post by Suso » Wed Feb 10, 2016 1:44 pm

I made this post where I will write the links I'll find. Please share if you know a differente place where to find them:

Types of single row deep groove ball bearings:
Tipos de rodamientos rígidos de una hilera de bolas:

Image
RM2-2RS 3/8 V Groove Bearing in America:
Buy on Usa
Buy on Usa


RM2-2RS 3/8 V Groove Bearing in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España







Image
6204 Bearing in America(20X47X14mm):
Buy on Usa


6204 Bearing in Europe(20X47X14mm):
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España






Image
6201 Bearing in America(12X32X10mm):
Buy on Usa


6201 Bearing in Europe(12X32X10mm):
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España






Image
6000 ZZ Bearing in America(10X26X8mm):
Buy on Usa

6000 ZZ Bearing in Europe(10X26X8mm):
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España





Image

608 Bearing in America(8X22X7mm):
Buy on Usa


608 Bearing in Europe(8X22X7mm):
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España





Image
625 Bearing in America(5X16X5mm):
Buy on Usa


625 Bearing in Europe(5X16X5mm):
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España





Image
624 VV V Bearing(4X13X6mm) in America:
Buy on Usa


624 VV V Bearing(4X13X6mm) in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España

Gianvador
Posts: 11
Joined: Wed Feb 24, 2016 9:18 am

Bearings and Accessories

Post by Gianvador » Wed Feb 24, 2016 12:50 pm

Hi there,
I just had a look on Aliexpress: could also this one make the job?
http://it.aliexpress.com/item/V628ZZ-628-8-x24-x8-mm-V-grooved-straightener-guide-wheel-bearings-8-24-8-mm/32500199643.html?isOrigTitle=true
Gianluca

Suso
Posts: 876
Joined: Thu Oct 22, 2015 4:51 pm

Bearings and Accessories

Post by Suso » Wed Feb 24, 2016 1:40 pm

I think these can works!

Albert5
Posts: 2
Joined: Fri Jul 15, 2016 12:57 pm

Bearings and Accessories

Post by Albert5 » Thu Oct 27, 2016 11:22 am

Hi Suso F, Did you buy your V groove bearings from a site in the USA as I can find nothing similar on any of the UK or EU sites?

Suso
Posts: 876
Joined: Thu Oct 22, 2015 4:51 pm

Bearings and Accessories

Post by Suso » Thu Oct 27, 2016 11:35 am

hi Albert,

you can try on ebay

Albert5
Posts: 2
Joined: Fri Jul 15, 2016 12:57 pm

Bearings and Accessories

Post by Albert5 » Thu Oct 27, 2016 5:11 pm

Very Helpful.Many thanks, Suso F

Juan Antonio
Posts: 1
Joined: Thu Dec 24, 2015 10:45 am

Bearings and Accessories

Post by Juan Antonio » Tue Dec 06, 2016 11:26 am

Hola Suso, compré tus planos del 3D router hace un año exacto pero hasta ahora no he podido dedicarle tiempo a la construcción. He visto la actualización de rodamientos y he decidido ir a por este nuevo sistema aunque ya tenía comprados los rodamientos originales. Compré un set como los que ha puesto Gianvador pero el canal es demasiado estrecho, el perfil apenas entra, por lo que estoy buscando los de tipo W. He encontrado los mismos que has utilizado, pero también he encontrado estos bastante más baratos, y creo que podrían servir igual de bien incluso maltratar un poco menos el perfil de aluminio, pero me gustaría saber tu opinión antes de pedirlos:

10pcs-2016-CNC-machine-V-slot-Openbuilds-pulley-625ZZ-rail-aluminum-profile
Image
La única pega que les veo es que el orificio es para tornillería de 5mm en lugar de 8mm, ¿Qué opinas?

Muchisimas gracias y enhorabuena por tu trabajo!

Suso
Posts: 876
Joined: Thu Oct 22, 2015 4:51 pm

Bearings and Accessories

Post by Suso » Tue Dec 06, 2016 5:09 pm

hola Juan!
efectivamente los que ha usado Gianvador tienen poco canal. Estos que has linkeado tampoco creo que sirvan...ya los he usado pero para otros proyectos más pequeños y en los que no deben soportar tanta carga, como raíles para cámaras de fotos o pequeñas Cnc laser.

Te recomiendo ir con los RM2-2RS 3/8 V o unos 608 pero de los buenos.

Anass
Posts: 2
Joined: Tue Nov 22, 2016 2:49 am

Bearings and Accessories

Post by Anass » Mon Dec 19, 2016 1:41 pm

Hello,
The 608 bearings are 8mm of internal diameter,
the RM2-2RS 3/8 V are 9.54 mm of internal diameter,
Something is not clear for me on how you upgraded RM2-2RS 3/8 V keeping the same M8 bolts,
then have you changed all the router aluminium L perfils with those of steel, or only some of them ?
I would like to build the upgraded 3D router but the downloaded plans still have not been upgraded, I've seen the video but it doesn't cover all the axis,
Could you clarify please.

Suso
Posts: 876
Joined: Thu Oct 22, 2015 4:51 pm

Bearings and Accessories

Post by Suso » Mon Dec 19, 2016 2:51 pm

hi Annas,

yes, the 608 bearings have 8 mm inner hole, and the RM2-2RS 3/8 V have 9.54 mm.
In my upgrade I have used inches screws(3/8)

You can use the same M8 screws if you use a steel pipe to insert into the bearing (10mm external diameter and 8mm inner)
If so, you have to sand the outside of the steel pipe a bit to be able to insert it into the RM2-2RS bearing...

If you use the RM2-2RS bearings, you will not need to change the alluminium profile, I'm still with them!

If you take off the aluminum profiles and you use steel profiles, you can continue using the 608 bearings!

I'm not planning to update the plans of the 3D Router because, as you can see in the video, hardly any modifications are necessary and both systems are good if made correctly and with the right parts. You only need to separate the bearings 6mm on axis Y and X, and lower the Z axis part another 6mm as seen in the video.

let me know if you still have problems...

Post Reply