Today I'm going to make this folding knife using recycled materials.
In this article I will show you how to make the thickness sander to attach to my homemade lathe.
I will show you how to make the belt sander to attach to my homemade lathe.
Today I want to show you my last project, a dowel jig made with hard plywood leftovers and a few bolts.
In this article I'll show how to make a pepper mill with olive wood and my homemade lathe.
Today I'll make an angle drill press vise that will allow me to drill and mill holes at an angle.
I'm going to turn a bowl using my lathe equipped with an adjustable chuck.
In this article I’m going to show you how I made these accessories for the lathe.
As it is not easy to find plunge holders for the euro neck routers, I decided to build my own.
In this Article let's talk about some Safety Tips when using the Table Saw.
A Lathe made completely with birch plywood that I've also attached a Disc Sander on the left side.
I've decided to build a new holding system based on the one I had used for my coping saw...
It's time to perform maintenance on my 3D Router. I'm going to focus on the bearings and the...
An Inverted Jig Saw Guide that can be adapted to all tables or workbenchs.
During several of my last few projects I missed having a Spray Booth, so I've decided to build one.