It will allow me to sharpen almost all of my knives, chisels and gouges on my homemade lathe.
I'll use it with my homemade lathe and grinding wheel to sharpen almost all the woodturning chisels.
After using my homemade band saw for a year, I’ve decided I should make some improvements to the blade guides and saw table.
In this second article I’m going to install the benchtop and make the cutting station.
Cleaning and sharpening router bits with my homemade sharpening jig.
Third article in the series where I show you how to make the guides for the blade and the saw's table.
There are many similar jointer-planer models, all of them likely manufactured in the same place.
A 2-in-1 Marking Gauge and Beam Compass recycling an old Plotter Blade Holder and a few scrap wood.
Here you'll find all the Marking Gauge and Beam Compass our users are making.
Today I want to show you my last project, a dowel jig made with hard plywood leftovers and a few bolts.
I need to sharpen almost all of my chisels, so I've decided to make this simple sharpening jig to streamline and improve the process.
I can also use it to cut circles up to 60cm in diameter thanks to a locking system that will act as a rotation axis.
I've come up with an original locking system by expansion for the fence, that's simple and efficient.
How to make a stand compatible with a Jointer & Planer combo or other small portable tools.
Mix of woodorking projects that the readers are making guided by our plans.