The Coping Saw

07/15/2016 16:58:22   Categories: DIY Tools , Saws , Workshop Projects

Welcome back. This time I will make a small Coping Saw with some plywood scraps and a pair of screws. This way I can take advantage of all the saw blades that I have them in my workshop. As you know, vary according to the number of teeth and width of the saw blade, depending on the job. I also have helical blades ideal for curve cuts.

Here you'll find the free plans.


This is how the SketchUp file looks like, you can download it for free in my web, you´ll find a link in the foot page.


Now let's see how to make it! Glue the printable template onto the plywood and cut along the lines with the Portable Workshop.


Run the piece through the drill press drum to sand the curved shapes, and round the edges with the router.


Next, we drill a through hole with a 4mm drill bit and countersink.

Now, we do a channel with the exact thickness of the two washers and the blade width. We cut and glue these two pieces to make the handle more ergonomic.


Sand the handle as well as the Coping Saw. We Will apply varnish later. The final step is to assemble all the pieces, align both washers and put the screws in with wing nuts.


Let's put our blade applying a little pressure to ensure the blade is tight. First we will try it on a piece of wood with a big tooth blade, and now we try it on a piece of acrylic with the thinnest blade I have.

Where to get some materials and tools used in this project:

Visit the Copin Saw Topic in Forum:

Related posts

Share

View all comments (2)

02/16/2018 10:14:55

Suso

hola Marcos, mira en el apartado "tienda" de esta web

07/10/2017 17:36:20

[email protected]

Excelente trabajo, como obtengo los planos para hacer una

Add a comment

 (with http://)