Viability of a project, uses of homemade machines, tools and knowledge required, choice of materials and safety... Author's reflections.
I'm going to show you how I made these wheels for my new belt sander.
I've tried out many of my projects such as the omelette flipper or my DSLR camera shoulder rig outdoors.
I'm going to show you how to build and use this bending iron I made a few years back.
In this article I'll show you how to sharpen your chisels and plane blades using my sharpening jig and sandpaper.
In this Article let's talk about some Safety Tips when using the Table Saw.
In this article I'll try the oil mixture I prepared in my previous video.
Today I'm going to show you how to prepare a very useful oil-based varnish...
This article is about a very useful tool for our workshop, a sanding drums you can easily use with your drill.
This is a simple explanation and the pros and cons of the three blades I use in my Inverted Circular Saws.
An easy way of making Mortise and Tenon Joints with the 3D Router, Table Saw and a 8mm router bit.
I am going to make an update for my Jig Saw Guide so I can use it with blade angles up to 45 degrees.
Two different ways of making a milling with the 3d Router.
I am gonna try to explain a bit the differences and benefits over the classic ones.
Restoring old tools, making new handles of ash and maple.