Third article in the new workbench series where I will show you how I built the hold fast clamps and bench dogs.
In this second article I’m going to install the benchtop and make the cutting station.
High capacity multi-function plywood workbench with cutting station and storage space.
Homemade jig that will allow you sharpen circular saw blades, drill bits and router bits.
Clothing and stickers with Paoson.com logo and designs. Check them out!
There are many similar jointer-planer models, all of them likely manufactured in the same place.
Uses of homemade machines, tools and knowledge required, choice of materials... Author's reflections.
First cuts of my new Diy Band Saw, main features, how to Set Up, improvements and blade choice.
Third article in the series where I show you how to make the guides for the blade and the saw's table.
I'll show you how to cut the parts that will support the entire structure of the band saw, as well as the wheel's lifting and tilting system.
Because of the way I work, this kind of edge belt sander is one of the tools I rely on most, and I use it in almost all of my projects.
I'm going to show you how I made these wheels for my new belt sander.
As it is not easy to find plunge holders for the euro neck routers, I decided to build my own.
Today I want to show you my last project, a dowel jig made with hard plywood leftovers and a few bolts.
I need to sharpen almost all of my chisels, so I've decided to make this simple sharpening jig to streamline and improve the process.