The idea arose after dealing with the difficulties and loss of time in preparing for certain CNC jobs.
Third article in the series where I show you how to make the guides for the blade and the saw's table.
There are many similar jointer-planer models, all of them likely manufactured in the same place.
A Portable Workshop for those of you that don't have much space or a cabinet you can carry all your stuff.
A 2-in-1 Marking Gauge and Beam Compass recycling an old Plotter Blade Holder and a few scrap wood.
As it is not easy to find plunge holders for the euro neck routers, I decided to build my own.
First cuts of my new Diy Band Saw, main features, how to Set Up, improvements and blade choice.
I'll show you how to cut the parts that will support the entire structure of the band saw, as well as the wheel's lifting and tilting system.
Clothing and stickers with Paoson.com logo and designs. Check them out!
I'm going to show you how I made these wheels for my new belt sander.
Today I want to show you my last project, a dowel jig made with hard plywood leftovers and a few bolts.
I need to sharpen almost all of my chisels, so I've decided to make this simple sharpening jig to streamline and improve the process.
A very easy to build Scroll Saw and another one to use as an accessory for the Portable Workshop.
Today I will make a grinding wheel for the lathe so that I can sharpen all my woodturning chisels and other kinds of chisels.
I can also use it to cut circles up to 60cm in diameter thanks to a locking system that will act as a rotation axis.