Second article about the modular workbench, where I will install the top and the vise of the bench.
Configurable modular workbench with great storage capacity that can also be used as a mobile tool stand.
Turn your Dremel-type rotary tool into a drill press, a router table and a lathe.
How to make a 3-in 1 workstation for Dremel-type tools. Drill press, router table and lathe.
How to make a plunge base that can be used with Dremel-type rotary tools.
Uses of homemade machines, tools and knowledge required, choice of materials... Author's reflections.
It will allow me to sharpen almost all of my knives, chisels and gouges on my homemade lathe.
I'll use it with my homemade lathe and grinding wheel to sharpen almost all the woodturning chisels.
After using my homemade band saw for a year, I’ve decided I should make some improvements to the blade guides and saw table.
Last article where I'll show how to make the drawers and doors using the cutting station of the workbench.
Third article in the new workbench series where I will show you how I built the hold fast clamps and bench dogs.
In this second article I’m going to install the benchtop and make the cutting station.
High capacity multi-function plywood workbench with cutting station and storage space.
Because of the way I work, this kind of edge belt sander is one of the tools I rely on most, and I use it in almost all of my projects.
A Lathe made completely with birch plywood that I've also attached a Disc Sander on the left side.