Uses of homemade machines, tools and knowledge required, choice of materials... Author's reflections.
I'll use it with my homemade lathe and grinding wheel to sharpen almost all the woodturning chisels.
After using my homemade band saw for a year, I’ve decided I should make some improvements to the blade guides and saw table.
Homemade jig that will allow you sharpen circular saw blades, drill bits and router bits.
I'll show you how to make a wooden jig to sharpen the knifes of your planer-jointer combo.
I'm going to show you how I made these wheels for my new belt sander.
In this article I'll show you how to sharpen your chisels and plane blades using my sharpening jig and sandpaper.
I'm going to show you how to build and use this bending iron I made a few years back.
In this article I'll try the oil mixture I prepared in my previous video.
Today I'm going to show you how to prepare a very useful oil-based varnish...
This article is about a very useful tool for our workshop, a sanding drums you can easily use with your drill.
This is a simple explanation and the pros and cons of the three blades I use in my Inverted Circular Saws.
An easy way of making Mortise and Tenon Joints with the 3D Router, Table Saw and a 8mm router bit.
I am going to make an update for my Jig Saw Guide so I can use it with blade angles up to 45 degrees.