Router & Saw Table » Plywood sizes in USA

AuthorPost

Suso C.

Registered on : 10/22/2015

Posts : 651

Posted : 01/07/2018 17:28:06 "Quote"

hello again,
for now I have not developed a drill press, the more similar thing I have is this, you can download the plans for free:

drill press stand:

Charles E.

Registered on : 01/01/2018

Posts : 6

Posted : 01/11/2018 02:48:05 "Quote"

I see where you have a adapter for a scroll saw using a jig saw for the action.
Based on what I was able to determine from the pictures it looks like it could be used by attaching it to the portable table I bought the plans for.
Does it mount to the portable table and tie into the jig you already have mounted? That would be really great if it did.

Charles E.

Registered on : 01/01/2018

Posts : 6

Posted : 01/12/2018 14:23:12 "Quote"

Did you understand my question?
I am looking for what I thought I saw in your collection of jigs and apapters.
It looked like it was a way to convert the inverted jigsaw in your portable worktable into a scroll saw.
The more I look at what you have the more impressed I am. I am trying to figure out how to get all my necessary tools mounted to you worktable.
You have the tablesaw, router, jigsaw already. I am wanting to add a detachable adapter for mounting a hand drill table press, The conversion of the jigsaw to scroll saw and finally (for now) a sanding disc or drum.
Do that and you have one HECK of a woodworkers dream.

Suso C.

Registered on : 10/22/2015

Posts : 651

Posted : 01/12/2018 16:54:16 "Quote"

hello Charles,
I had not seen the message, I'm sorry.
You can adapt this portable scroll saw to any worktable, maybe you should modify some piece if your worktable is different.
If you want to install it on the router & saw table, you will probably have to modify the long of the arm of the scroll saw.