Portable Workshop » 18 mm and 9 mm plywood?

AutorMensaje

René

Registrado : 08/04/2016

Mensajes : 2

Emitido : 08/04/2016 07:04:02 "Citar"

Hi there,

I have a question regarding the cutting list in "Cutting List > MaxCut > 18mm Plywood CSV".

In the CSV there are some 9 mm plywood parts. Let's take part no. 26 for example.
In the image Export 1.Png you can find the part no. 26 but you can also find parts which are 18 mm.
But 9 mm and 18 mm parts can't be on the same plywood sheet, or am I wrong?

Maybe the 9 mm plywood in the CSV is wrong, and everything should be 18 mm?
(Or maybe I just don't understand...)

Best
René

René

Registrado : 08/04/2016

Mensajes : 2

Emitido : 08/04/2016 07:23:06 "Citar"

Ok, I think I can answer myself now.

Part 26 is part of the router holder.
And it isused in 9 mm AND 18 mm.
And they are glued/screwed together to get a 27 mm thick part.

Suso C.

Registrado : 22/10/2015

Mensajes : 586

Emitido : 08/04/2016 18:15:12 "Citar"

Quote René :
Ok, I think I can answer myself now.

Part 26 is part of the router holder.
And it isused in 9 mm AND 18 mm.
And they are glued/screwed together to get a 27 mm thick part.



You are right! are two glued pieces, 18 and 9mm