DIY Incremental Circle Jig

[Suso]

New project on the way! DIY Incremental Circle Jig:

[Suso]

I just posted a new video on Youtube to show you my last project. An innovative incremental jig that will allow me to cut circles safely and precisely on a band saw or router table.

[Suso]

I've edited this video to show you how my new incremental circle jig works. By turning a threaded rod I can adjust the desired cutting radius. Each complete turn of the rod moves it 1 mm.

I marked the coupling nut with some numbers to use as a reference, but I can also adjust the cutting radius with the T-slot stop. This innovative circle jig will allow me to cut circles safely and precisely on a band saw or router table.

[Suso]

I just posted a new video on Youtube to show you how to build my new DIY circle cutting jig that doesn't require you to drill the workpiece. I made an acrylic base to stick to the bottom of the workpiece to use as rotation axis. This way I was able to cut a round cutting board.

[Suso]

Besides cutting circles on a band saw, my new incremental jig will allow me to do circular milling jobs with different router bits. I've edited this short video to showcase some examples!

[Suso]

Quick and simple method to cut circles without the need for a center hole. I made a base with acrylic and stuck it to the bottom of the piece with double-sided tape.