Plunge Router Base Presentation

Discuss topics related to woodworking projects
Post Reply
Suso
Posts: 2217
Joined: Thu Oct 22, 2015 4:51 pm

Plunge Router Base Presentation

Post by Suso » Fri Jun 03, 2016 7:35 am

As it is not easy to find in the market plunge holders for 43mm Euro Neck Routers, I decided to build my own. It is designed for using with routers up to 80mm diameter. For bigger routers, you will need to modify the plans.
More info on Blog:

Como en el mercado no abundan los soportes de Inmersión para fresadoras de cuello europeo de 43mm, he decidido fabricarme uno.

Artículo en Blog:

Image

Image

Fokyou
Posts: 8
Joined: Tue Sep 20, 2016 7:30 pm

Plunge Router Base Presentation

Post by Fokyou » Fri Sep 30, 2016 11:42 am

Can I use this with a driling machine instead of a router?
Best regards!

Suso
Posts: 2217
Joined: Thu Oct 22, 2015 4:51 pm

Plunge Router Base Presentation

Post by Suso » Sat Aug 11, 2018 6:50 pm

wrote:Can I use this with a driling machine instead of a router?
Best regards!


to make holes you con use it,
but not for milling, a drill rotates at fewer revolutions that a router.

tanzelmo@gmail.com
Posts: 3
Joined: Fri Oct 28, 2022 6:28 pm

Re: Plunge Router Base Presentation

Post by tanzelmo@gmail.com » Mon Sep 04, 2023 1:43 pm

Relative to the adjustable router template, it appears as though it only works with your plunge router base and not typical router bases (e.g. DEWALT DWP611PK) using a pattern bit. The sides of the template, being a T track, doesn't provide a solid surface for the bearing of a standard pattern bit to follow.

What am I missing?

Suso
Posts: 2217
Joined: Thu Oct 22, 2015 4:51 pm

Re: Plunge Router Base Presentation

Post by Suso » Mon Sep 04, 2023 1:53 pm

hi mate, these types of adjustable templates works with any router base in which you can install a guide bushing. Check this out:
There are bushing for almost all types of routers, google "router guide bushing"

tanzelmo@gmail.com
Posts: 3
Joined: Fri Oct 28, 2022 6:28 pm

Re: Plunge Router Base Presentation

Post by tanzelmo@gmail.com » Mon Sep 04, 2023 5:07 pm

Thanks!

Post Reply