Discuss topics related to woodworking projects
-
Suso
- Posts: 2320
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Fri Apr 29, 2016 1:57 pm
This is my most recent project. A very easy to build Scroll Saw and another one to use as an accessory for the Portable Workshop. I will use my Jig Saw as motor, hard plywood and some screws.
More info on Blog

-
Thomas6
- Posts: 21
- Joined: Wed Mar 02, 2016 5:17 pm
Post
by Thomas6 » Sat Apr 30, 2016 2:01 pm
The next great idea!
-
Onofre
- Posts: 6
- Joined: Thu Jun 04, 2015 8:59 am
Post
by Onofre » Sat May 07, 2016 6:22 am
Hi Suso,
can you please post the dimensions of the spring that you have used, just to figure out what I need...
thanks
-
info@paoson
- Posts: 43
- Joined: Thu Oct 15, 2015 5:35 pm
Post
by info@paoson » Mon May 09, 2016 5:47 am
Hi Onofre,
I am not sure about what you mean, since I see you bought the plans and the dimensions are in there.
-
Onofre
- Posts: 6
- Joined: Thu Jun 04, 2015 8:59 am
Post
by Onofre » Mon May 09, 2016 5:57 am
Thank you.
Looking at the plans I only can see number 23 spring and total lenght.
I just need the diameter of the coils and section of the wire.
kind regards
-
Guddu
- Posts: 3
- Joined: Tue May 10, 2016 1:49 pm
Post
by Guddu » Tue May 10, 2016 11:52 am
Hay Suso will you please tell me about the Blades size and where can i find these blades
-
Guddu
- Posts: 3
- Joined: Tue May 10, 2016 1:49 pm
Post
by Guddu » Tue May 10, 2016 11:55 am
Hay Suso, I am living in Pakistan and need Scroll Saw cutting Blades for Thick wood will you please size 9,4,3, are available but 12 size are not available will you please help me
-
info@paoson
- Posts: 43
- Joined: Thu Oct 15, 2015 5:35 pm
Post
by info@paoson » Tue May 10, 2016 12:29 pm
Hi Goddu,
I am not sure if you are talking in cm or inches... these are what I am using now, I don´t know if they are available in your country, but you can buy them on ebay:
Ebay
Amazon:
-
Guddu
- Posts: 3
- Joined: Tue May 10, 2016 1:49 pm
Post
by Guddu » Wed May 11, 2016 1:03 pm
Brother thanks for kind reply , sorry for disturbance actually i am using blades without pin they are made in Germany
which are in inches if you want i will take a picture of it packet for your convenience because i cont understand German language , any how if you have any idea to solve my problem ,i will be highly thankful, thanks again for your kind information.
Have a good time