Scroll Saw/Scroll Saw Portable Presentation

Post by **Suso** » Fri Apr 29, 2016 1:57 pm

This is my most recent project. A very easy to build Scroll Saw and another one to use as an accessory for the Portable Workshop. I will use my Jig Saw as motor, hard plywood and some screws.

More info on Blog

Thomas6 · Post by **Thomas6** » Sat Apr 30, 2016 2:01 pm

The next great idea!

Onofre · Post by **Onofre** » Sat May 07, 2016 6:22 am

Hi Suso,

can you please post the dimensions of the spring that you have used, just to figure out what I need...

thanks

info@paoson · Post by **info@paoson** » Mon May 09, 2016 5:47 am

Hi Onofre,
I am not sure about what you mean, since I see you bought the plans and the dimensions are in there.

Onofre · Post by **Onofre** » Mon May 09, 2016 5:57 am

Thank you.
Looking at the plans I only can see number 23 spring and total lenght.
I just need the diameter of the coils and section of the wire.

kind regards

info@paoson · Post by **info@paoson** » Mon May 09, 2016 6:12 am

Ok,

the coils and sections are the same than this (not the large) :

http://paoson.com/en/forum/37s/23-spring

I'm updating the plans with this information, thanks for pointing that out!

Guddu · Post by **Guddu** » Tue May 10, 2016 11:52 am

Hay Suso will you please tell me about the Blades size and where can i find these blades

Guddu · Post by **Guddu** » Tue May 10, 2016 11:55 am

Hay Suso, I am living in Pakistan and need Scroll Saw cutting Blades for Thick wood will you please size 9,4,3, are available but 12 size are not available will you please help me

info@paoson · Post by **info@paoson** » Tue May 10, 2016 12:29 pm

Hi Goddu,

I am not sure if you are talking in cm or inches... these are what I am using now, I don´t know if they are available in your country, but you can buy them on ebay:

Ebay

Amazon:

Guddu · Post by **Guddu** » Wed May 11, 2016 1:03 pm

Brother thanks for kind reply , sorry for disturbance actually i am using blades without pin they are made in Germany
which are in inches if you want i will take a picture of it packet for your convenience because i cont understand German language , any how if you have any idea to solve my problem ,i will be highly thankful, thanks again for your kind information.
Have a good time