Page 1 of 2
Scroll Saw/Scroll Saw Portable Presentation
Posted: Fri Apr 29, 2016 1:57 pm
by Suso
This is my most recent project. A very easy to build Scroll Saw and another one to use as an accessory for the Portable Workshop. I will use my Jig Saw as motor, hard plywood and some screws.
More info on Blog
Scroll Saw/Scroll Saw Portable Presentation
Posted: Sat Apr 30, 2016 2:01 pm
by Thomas6
The next great idea!
Scroll Saw/Scroll Saw Portable Presentation
Posted: Sat May 07, 2016 6:22 am
by Onofre
Hi Suso,
can you please post the dimensions of the spring that you have used, just to figure out what I need...
thanks
Scroll Saw/Scroll Saw Portable Presentation
Posted: Mon May 09, 2016 5:47 am
by info@paoson
Hi Onofre,
I am not sure about what you mean, since I see you bought the plans and the dimensions are in there.
Scroll Saw/Scroll Saw Portable Presentation
Posted: Mon May 09, 2016 5:57 am
by Onofre
Thank you.
Looking at the plans I only can see number 23 spring and total lenght.
I just need the diameter of the coils and section of the wire.
kind regards
Scroll Saw/Scroll Saw Portable Presentation
Posted: Mon May 09, 2016 6:12 am
by info@paoson
Ok,
the coils and sections are the same than this (not the large) :
http://paoson.com/en/forum/37s/23-spring
I'm updating the plans with this information, thanks for pointing that out!
Scroll Saw/Scroll Saw Portable Presentation
Posted: Tue May 10, 2016 11:52 am
by Guddu
Hay Suso will you please tell me about the Blades size and where can i find these blades
Scroll Saw/Scroll Saw Portable Presentation
Posted: Tue May 10, 2016 11:55 am
by Guddu
Hay Suso, I am living in Pakistan and need Scroll Saw cutting Blades for Thick wood will you please size 9,4,3, are available but 12 size are not available will you please help me
Scroll Saw/Scroll Saw Portable Presentation
Posted: Tue May 10, 2016 12:29 pm
by info@paoson
Hi Goddu,
I am not sure if you are talking in cm or inches... these are what I am using now, I don´t know if they are available in your country, but you can buy them on ebay:
Ebay
Amazon:
Scroll Saw/Scroll Saw Portable Presentation
Posted: Wed May 11, 2016 1:03 pm
by Guddu
Brother thanks for kind reply , sorry for disturbance actually i am using blades without pin they are made in Germany
which are in inches if you want i will take a picture of it packet for your convenience because i cont understand German language , any how if you have any idea to solve my problem ,i will be highly thankful, thanks again for your kind information.
Have a good time