New project! A 3-in-1 workstation for use with rotary tools.
This is the SketchUp 3D model where you can see a small drill press. By turning it, it becomes a mini-lathe and by turning it again, it becomes a router table.
It will be very useful for small operations, in my case it will come in handy for luthier jobs!
Artículo acerca de mi nueva estación de trabajo 3-en-1 para usar con herramientas rotativas tipo dremel.
Rotary Tool 3-in-1 Workstation
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Rotary Tool 3-in-1 Workstation
Testing the rotary tool workstation lift system. I've used aluminum square tube and a 3D printer spindle screw. It works fine!
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Rotary Tool 3-in-1 Workstation
I've tried my new rotary tool workstation making a new truss rod cover for one of the guitars I made years ago.
I used motherpearl to make the inlay.
I used motherpearl to make the inlay.
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Rotary Tool 3-in-1 Workstation
Here a short video where I show you how I made this truss rod cover for my guitar using the rotary tool workstation. You'll find the full video on my youtube channel!
and one more video where I show you the rotary tool workstation's lathe function. I made a bridge pin for an acoustic guitar. This is the piece that holds the guitar strings against the bridge. Full Article:
and one more video where I show you the rotary tool workstation's lathe function. I made a bridge pin for an acoustic guitar. This is the piece that holds the guitar strings against the bridge. Full Article:
-
- Posts: 3
- Joined: Fri Sep 17, 2021 4:00 pm
Rotary Tool Workstation
Hi I am in the process of building this. I have managed to machine all the parts on my CNC. I have got to the assembly stage and I'm a little puzzled on PARTS 6. Are they screwed to PART 1 or to PART 3. Or do I glue them to part 3. Nothing on the plans shows fixings for these.
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Rotary Tool Workstation
hi mate,Caterpillar wrote: ↑Sun Oct 10, 2021 7:49 pmHi I am in the process of building this. I have managed to machine all the parts on my CNC. I have got to the assembly stage and I'm a little puzzled on PARTS 6. Are they screwed to PART 1 or to PART 3. Or do I glue them to part 3. Nothing on the plans shows fixings for these.
those pieces n.6 must be screwed to both pieces n.1 and n.3.
Please send me some pictures when you finish the Workstation!