Page 1 of 1

Rotary Tool 3-in-1 Workstation

Posted: Mon Oct 14, 2019 4:42 pm
by Suso
New project! A 3-in-1 workstation for use with rotary tools.
This is the SketchUp 3D model where you can see a small drill press. By turning it, it becomes a mini-lathe and by turning it again, it becomes a router table.
It will be very useful for small operations, in my case it will come in handy for luthier jobs!

Image

Image

Image

Re: Rotary Tool 3-in-1 Workstation

Posted: Fri Oct 25, 2019 2:23 pm
by Suso
Testing the rotary tool workstation lift system. I've used aluminum square tube and a 3D printer spindle screw. It works fine!


Re: Rotary Tool 3-in-1 Workstation

Posted: Sat Nov 02, 2019 2:42 pm
by Suso
I've tried my new rotary tool workstation making a new truss rod cover for one of the guitars I made years ago.
I used motherpearl to make the inlay.

Image

Image

Re: Rotary Tool 3-in-1 Workstation

Posted: Wed Nov 27, 2019 1:52 pm
by Suso
Here a short video where I show you how I made this truss rod cover for my guitar using the rotary tool workstation. You'll find the full video on my youtube channel!



and one more video where I show you the rotary tool workstation's lathe function. I made a bridge pin for an acoustic guitar. This is the piece that holds the guitar strings against the bridge. Full Article: