As it is not easy to find in the market plunge holders for 43mm Euro Neck Routers, I decided to build my own. It is designed for using with routers up to 80mm diameter. For bigger routers, you will need to modify the plans.
More info on Blog:
Como en el mercado no abundan los soportes de Inmersión para fresadoras de cuello europeo de 43mm, he decidido fabricarme uno.
Artículo en Blog:
Plunge Router Base Presentation
-
- Posts: 8
- Joined: Tue Sep 20, 2016 7:30 pm
Plunge Router Base Presentation
Can I use this with a driling machine instead of a router?
Best regards!
Best regards!
-
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Plunge Router Base Presentation
wrote:Can I use this with a driling machine instead of a router?
Best regards!
to make holes you con use it,
but not for milling, a drill rotates at fewer revolutions that a router.
-
- Posts: 5
- Joined: Fri Oct 28, 2022 6:28 pm
Re: Plunge Router Base Presentation
Relative to the adjustable router template, it appears as though it only works with your plunge router base and not typical router bases (e.g. DEWALT DWP611PK) using a pattern bit. The sides of the template, being a T track, doesn't provide a solid surface for the bearing of a standard pattern bit to follow.
What am I missing?
What am I missing?
-
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Plunge Router Base Presentation
hi mate, these types of adjustable templates works with any router base in which you can install a guide bushing. Check this out:
There are bushing for almost all types of routers, google "router guide bushing"
There are bushing for almost all types of routers, google "router guide bushing"
-
- Posts: 5
- Joined: Fri Oct 28, 2022 6:28 pm