While I was working on a project I realized I could really use a height gauge for my router bits and discs, so I've decided to make one based on commercially available ones using my digital caliper. I wanted to make one that would have to be easy to assemble and disassemble for convenience, so I decided to make use of a powerful screw magnet I had in my shop.
More info and free plans
Hace unos días realizando uno de mis proyectos he echado en falta un calibre para medir las fresas o el disco en altura, así que voy a fabricarme uno basado en los que se pueden encontrar en el mercado pero usando mi calibre digital.
Más info y planos gratis:
Homemade Height Gauge
-
- Posts: 1
- Joined: Tue Oct 11, 2016 6:35 pm
Homemade Height Gauge
Hi...thanks for sharing your work. I want to know if it is possible to use the ultrasonic sensor and Arduino to build this. I want to make it. How much power of ultrasonic will be enough? How did you build it using the sensor? Which concept did you use?
-
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Homemade Height Gauge
Hi VallyOrent,
It's possible to make, but the problem is the precission of the sensor and the size of a drill/disc is very small to measure. In this project I used SR04. But this sensor is not accurate for this kind of work. Maybe with a laser sensor you can get good results.
It's possible to make, but the problem is the precission of the sensor and the size of a drill/disc is very small to measure. In this project I used SR04. But this sensor is not accurate for this kind of work. Maybe with a laser sensor you can get good results.