Lukasz's 3D Router Project

Share your woodworking projects!
Post Reply
Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Lukasz's 3D Router Project

Post by Suso » Mon Oct 30, 2017 12:01 pm

Lukasz's 3D Router Project, he wrote:

Hello, my name is Lukasz and I live in Poland. I am sending pictures of my 3d router. I used a linear CNC bearings and extended table to 70x90cm

Regards,
Luke

Image

Image

Image

Image

Image

Bigkahunaww
Posts: 3
Joined: Thu Nov 21, 2019 2:56 pm

Re: Lukasz's 3D Router Project

Post by Bigkahunaww » Mon Nov 25, 2019 6:27 pm

I am starting my build on a 3d router and plan to use linear bearings also.
I noticed you have a single shaft on each side, does that provide enough support for the carrage assembly ??
Anything different you would do if you were to build another one ??

Thank you
Dave
Central Texas

Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: Lukasz's 3D Router Project

Post by Suso » Tue Nov 26, 2019 10:26 am

hello Dave,
yes, if you use linear bearings a single shaft on each side will be enough.
When I spoke with Lucasz, he told me that his 3D Router workes perfectly!

best regards,
Suso

Bigkahunaww
Posts: 3
Joined: Thu Nov 21, 2019 2:56 pm

Re: Lukasz's 3D Router Project

Post by Bigkahunaww » Wed Dec 04, 2019 2:21 am

I noticed in Lukasz version he has a adjustment wheel mounted on the to of the Z axis.
What would that be for ??

Also, how do you loch down the z axis at a certain height ?
IE: like if I wanted to lower a router bit to a specific height and have it maintain that height??

I am thinking along the lines of inlay and marquetry.

Thanks
Dave

Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: Lukasz's 3D Router Project

Post by Suso » Wed Dec 04, 2019 10:41 am

hello again Dave,

I think that Lukasz has added that adjustment wheel in order to lower the router bit to a specific height. In the original design you cannot lock the Z axis, but you can do the same as Lukas, or use the adjustment wheel of the Y axis to lower the router bit to a specific height.

Biribis
Posts: 1
Joined: Tue May 26, 2020 5:11 pm

Re: Lukasz's 3D Router Project

Post by Biribis » Tue May 26, 2020 5:34 pm

Bonjour,
Je suis Français à la retraite et toujours passionné par le façonnage du bois qui était mon métier
Excusez moi mais je ne pratique pas du tout l'anglais c'est pour cela que mon message est en Français.

Je suis très intéressé par votre projet.
J'ai acheté les plans 3D Router, when a CNC machine is overkill.
C'est votre système de coulissage qui me parait le plus adapté.
Sur les plans du système acheté, la montée et la descente du bloc router est retenu par un ressort qui permet de maintenir le bloc.
D'après les images que j'ai imprimées de votre système, je ne vois pas comment vous manœuvrez la montée et la descente du bloc.
Auriez-vous des images ou un plan qui démontrent votre système que je puisse retranscrire et utiliser votre méthode de montée et descente du router.

J'attends avec impatience votre solution pour la transposer sur ma future machine.

Bien cordialement.
Biribis

Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: Lukasz's 3D Router Project

Post by Suso » Wed May 27, 2020 9:00 am

Bonjour,
avez-vous revu tous les plans? il faut investir quelques heures pour retrouver toutes les informations contenues dans les plans. Autre chose, avez-vous vu les 11 vidéos sur la construction et l'utilisation de l'outil? vous trouverez ici la playlist

Post Reply