Mobile Workbench by Elmagoo

Share your woodworking projects!
Post Reply
elmagoo
Posts: 3
Joined: Mon Mar 13, 2023 8:31 pm

Mobile Workbench by Elmagoo

Post by elmagoo » Mon Mar 13, 2023 8:35 pm

Figured I'd also share my progress so far with just a few images. I'm making some modifications for the saw I'm using (SawStop Jobsite Pro), and that I already have a Rockler undermount box for the router table. I also wanted to see if I can use only 4 wheel casters instead of 6, so I added some bracing to go between the bottom rails for the front and the back. I'll post more later as it gets completed. Thanks for making such great plans and designing a great bench!!
Attachments
PXL_20230313_002910147.jpg
PXL_20230313_002910147.jpg (73.71 KiB) Viewed 3803 times
PXL_20230311_181652640.jpg
PXL_20230311_181652640.jpg (58.68 KiB) Viewed 3803 times
PXL_20230311_181646609.jpg
PXL_20230311_181646609.jpg (72.47 KiB) Viewed 3803 times
Last edited by elmagoo on Tue Mar 14, 2023 2:17 pm, edited 1 time in total.

Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: Mobile Workbench

Post by Suso » Tue Mar 14, 2023 8:39 am

hi mate, I look forward to seeing photos of your workbench!

elmagoo
Posts: 3
Joined: Mon Mar 13, 2023 8:31 pm

Re: Mobile Workbench

Post by elmagoo » Tue Mar 14, 2023 2:18 pm

hmm... I'm getting used to this forum system. I had images attached in the original post I thought? I just added them and now it has to go through approval again it seems ;p

Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: Mobile Workbench

Post by Suso » Tue Mar 14, 2023 2:30 pm

hi mate! now I can see your pictures, what a great project! instead of attaching the images I think it is easier to use the button "Upload an image". Try to make them square images of no more than 1200 pixels.

elmagoo
Posts: 3
Joined: Mon Mar 13, 2023 8:31 pm

Re: Mobile Workbench

Post by elmagoo » Tue Mar 14, 2023 3:09 pm

ahhh... good to know, thanks for the information :).

mrosso
Posts: 1
Joined: Sat Jul 15, 2023 4:58 pm

Re: Mobile Workbench

Post by mrosso » Sat Jul 15, 2023 5:04 pm

This is the exact setup I'm planning for my mobile workbench setup: SawStope Jobsite Pro, Rockler under-table router box. Did you have to change the plans/CAD at all?

Post Reply