Mobile Workbench by Elmagoo
-
- Posts: 3
- Joined: Mon Mar 13, 2023 8:31 pm
Mobile Workbench by Elmagoo
Figured I'd also share my progress so far with just a few images. I'm making some modifications for the saw I'm using (SawStop Jobsite Pro), and that I already have a Rockler undermount box for the router table. I also wanted to see if I can use only 4 wheel casters instead of 6, so I added some bracing to go between the bottom rails for the front and the back. I'll post more later as it gets completed. Thanks for making such great plans and designing a great bench!!
- Attachments
-
- PXL_20230313_002910147.jpg (73.71 KiB) Viewed 3896 times
-
- PXL_20230311_181652640.jpg (58.68 KiB) Viewed 3896 times
-
- PXL_20230311_181646609.jpg (72.47 KiB) Viewed 3896 times
Last edited by elmagoo on Tue Mar 14, 2023 2:17 pm, edited 1 time in total.
-
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench
hi mate, I look forward to seeing photos of your workbench!
-
- Posts: 3
- Joined: Mon Mar 13, 2023 8:31 pm
Re: Mobile Workbench
hmm... I'm getting used to this forum system. I had images attached in the original post I thought? I just added them and now it has to go through approval again it seems ;p
-
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench
hi mate! now I can see your pictures, what a great project! instead of attaching the images I think it is easier to use the button "Upload an image". Try to make them square images of no more than 1200 pixels.
-
- Posts: 3
- Joined: Mon Mar 13, 2023 8:31 pm
Re: Mobile Workbench
ahhh... good to know, thanks for the information .
-
- Posts: 1
- Joined: Sat Jul 15, 2023 4:58 pm
Re: Mobile Workbench
This is the exact setup I'm planning for my mobile workbench setup: SawStope Jobsite Pro, Rockler under-table router box. Did you have to change the plans/CAD at all?