Greetings Suso,
In your video, DIY Folding Outfeed table with built-in Crosscut sled PT 5.
The two steel pipes you cut to size to make the fence extension, may I please ask what size the steel pipes used are? And are they also the same size of steel pipe used to make the rotation axis for the legs of the outfeed table?
Last question, is this the same Aluminium Profile Fence used to make the fence of the crosscut sled?
Thank you. I appreciate your work. It is refined unlike anything else I’ve found online.
T-Track Profile and Accessories
-
Suso
- Posts: 2283
- Joined: Thu Oct 22, 2015 4:51 pm
Re: T-Track Profile and Accessories
hi Martin,
yes, that's the Aluminium Profile Fence.
I've used a steel pipe with an external diameter of 10mm and an internal diameter of 8mm for the fence extension, and another pipe with an internal diameter of 10mm and an external diameter of 13mm for the axis.
yes, that's the Aluminium Profile Fence.
I've used a steel pipe with an external diameter of 10mm and an internal diameter of 8mm for the fence extension, and another pipe with an internal diameter of 10mm and an external diameter of 13mm for the axis.
-
Martin K
- Posts: 2
- Joined: Sat Jan 20, 2024 9:46 pm
Re: T-Track Profile and Accessories
Thanks! I’m planning to start this project around April/May, after the snow melts here in Canada.
The only material I’ve been able to source that is similar to Valchromat I’ve pictured below. I believe these are ForesCOLOR panels that have been pre-cut to ~5mm thickness. I plan to use contact cement to adhere three panels to make ~15mm panels.
Do you think this material and my approach of cementing the panels together is suitable for the router/work/out-feed tables?
The only material I’ve been able to source that is similar to Valchromat I’ve pictured below. I believe these are ForesCOLOR panels that have been pre-cut to ~5mm thickness. I plan to use contact cement to adhere three panels to make ~15mm panels.
Do you think this material and my approach of cementing the panels together is suitable for the router/work/out-feed tables?
-
Suso
- Posts: 2283
- Joined: Thu Oct 22, 2015 4:51 pm
Re: T-Track Profile and Accessories
hi Martin,
if it is a material similar to MDF you should have no problems using it. Regarding gluing them, you can think about doing a test to see if it bends.
if it is a material similar to MDF you should have no problems using it. Regarding gluing them, you can think about doing a test to see if it bends.
-
DamiCTB
- Posts: 7
- Joined: Tue Apr 02, 2024 7:38 pm
Re: T-Track Profile and Accessories
Hola Suso,
Estoy comprando los materiales para comenzar con la mesa, en la lista la Incra Miter Channel pide una longitud de 653x2 + 570x1.
En la pagina me da como opción 610mm, algunas mas pequeñas y otras mas largas.
Me vale con 3 de esas y la corto o tengo que buscar en otro sitio?
https://www.fine-tools.com/t-track.html
Saludos!
Estoy comprando los materiales para comenzar con la mesa, en la lista la Incra Miter Channel pide una longitud de 653x2 + 570x1.
En la pagina me da como opción 610mm, algunas mas pequeñas y otras mas largas.
Me vale con 3 de esas y la corto o tengo que buscar en otro sitio?
https://www.fine-tools.com/t-track.html
Saludos!
-
Suso
- Posts: 2283
- Joined: Thu Oct 22, 2015 4:51 pm
Re: T-Track Profile and Accessories
hola DamiCTB,
en esa web, para los perfiles de aluminio por donde se desliza el carro deslizable y el aluminio para la fresadora de mesa, tienes medidas de 813mm y 1219mm. Tendrías que comprar tres de 813mm y cortarlos.
Creo que en Aliexpress los tienes más baratos. De este tipo, aunque comprueba el largo:
en esa web, para los perfiles de aluminio por donde se desliza el carro deslizable y el aluminio para la fresadora de mesa, tienes medidas de 813mm y 1219mm. Tendrías que comprar tres de 813mm y cortarlos.
Creo que en Aliexpress los tienes más baratos. De este tipo, aunque comprueba el largo: