Where to obtain materials and tools that I use
-
Suso
- Posts: 2157
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Thu Jul 29, 2021 11:41 am
I made this post where I will write the links I'll find. Please share if you know a differente place where to find them.
I usually use blast gates for 100 and 63mm dust hose.
Utilizo tajeas o guillotinas para tubo de 100 o 63mm.
Blast Gate in America:
Buy on Usa
Blast Gate in Europe:
Axminstertools
Tajeas o guillotinas
Comprar en España
-
Suso
- Posts: 2157
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Thu Jul 29, 2021 11:55 am
I usually use flange adaptors for 100 and 63mm dust hose.
Utilizo adaptadores para tubo de 100 o 63mm.
Flange adaptor in America:
Buy on Usa
Flange adaptor in Europe:
Axminstertools
Puerto Extracción polvo
Comprar en España
-
Suso
- Posts: 2157
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Thu Jul 29, 2021 12:01 pm
I usually use dust hose of 100 and 63mm.
Utilizo tubo de 100 o 63mm.
Dust hose in America:
Buy on Usa
Dust hose in Europe:
Axminstertools
Tubo o manguera transparente polvo
Comprar en España
-
Suso
- Posts: 2157
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Thu Jul 29, 2021 12:16 pm
I usually use dust hose of 100 and 63mm.
Utilizo tubo de 100 o 63mm.
Y-Junction in America:
Buy on Usa
Y-Junction in Europe:
Axminstertools
Adaptador de conexión en Y
Comprar en España
-
Suso
- Posts: 2157
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Thu Jul 29, 2021 12:17 pm
-
Markgould
- Posts: 2
- Joined: Thu May 26, 2022 12:51 pm
Post
by Markgould » Thu May 26, 2022 12:54 pm
@suso thank you for this! I noticed you rub a full size dust collector on your DeWalt jobsite saw. Are you happy with the dust collection you get off of this? I have the same saw and am trying to figure out whether to get a shop vac or dust collector unit. Thanks in advance!
-
Suso
- Posts: 2157
- Joined: Thu Oct 22, 2015 4:51 pm
Post
by Suso » Thu May 26, 2022 1:48 pm
thanks Mark! I think both dust extraction systems are good, but to collect all the dust you will also have to use the blade guard and connect another pipe to that blade guard.
-
Markgould
- Posts: 2
- Joined: Thu May 26, 2022 12:51 pm
Post
by Markgould » Fri May 27, 2022 6:15 pm
Suso wrote: ↑Thu May 26, 2022 1:48 pm
thanks Mark! I think both dust extraction systems are good, but to collect all the dust you will also have to use the blade guard and connect another pipe to that blade guard.
Thank you! So theoretically either have the Dust Collector do a Y connection and split air to the saw exhaust and overhead, or use 2 machines...one for the overhead and another for the exhaust of the saw.
Yours is one of the few vids I see with a dust collector hooked up to a jobsite saw. What I am hearing from you is this is a viable option and you are satisfied with current performance. Hope I am tracking. Thanks for responding! I am looking forward to buying your workbench plans.
