Page 1 of 1
Single Stage Dust Collector
Posted: Fri Jun 18, 2021 10:51 am
by Suso
Single Stage Dust Collector:
Motor: (2 Hp / 240 V / 1500 watt)
Sacks Diameter: 500 mm
Sacks Heigth: 850 mm
Suction Flow: 2.500 m3 / hora
Metallic Turbine: 300 mm
Main Outputs: 2x 125 mm
Single Stage Dust Collector in Europe:
Buy on Usa
Single Stage Dust Collector in Europe:
Axminstertools:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Aspirador de saco para viruta:
Comprar en España
Dust Collection Blast Gate 100mm
Posted: Thu Jul 29, 2021 11:41 am
by Suso
I made this post where I will write the links I'll find. Please share if you know a differente place where to find them.
I usually use blast gates for 100 and 63mm dust hose.
Utilizo tajeas o guillotinas para tubo de 100 o 63mm.
Blast Gate in America:
Buy on Usa
Blast Gate in Europe:
Axminstertools
Tajeas o guillotinas
Comprar en España
Re: Dust Collection Flange Adaptor
Posted: Thu Jul 29, 2021 11:55 am
by Suso
I usually use flange adaptors for 100 and 63mm dust hose.
Utilizo adaptadores para tubo de 100 o 63mm.
Flange adaptor in America:
Buy on Usa
Flange adaptor in Europe:
Axminstertools
Puerto Extracción polvo
Comprar en España
Re: Dust Collection Hose
Posted: Thu Jul 29, 2021 12:01 pm
by Suso
I usually use dust hose of 100 and 63mm.
Utilizo tubo de 100 o 63mm.
Dust hose in America:
Buy on Usa
Dust hose in Europe:
Axminstertools
Tubo o manguera transparente polvo
Comprar en España
Re: Dust Collection Y-Junction
Posted: Thu Jul 29, 2021 12:16 pm
by Suso
I usually use dust hose of 100 and 63mm.
Utilizo tubo de 100 o 63mm.
Y-Junction in America:
Buy on Usa
Y-Junction in Europe:
Axminstertools
Adaptador de conexión en Y
Comprar en España
Re: Dust Collector Remote Control Switch
Posted: Thu Jul 29, 2021 12:17 pm
by Suso
Re: Dust Collection & Accessories
Posted: Thu May 26, 2022 12:54 pm
by Markgould
@suso thank you for this! I noticed you rub a full size dust collector on your DeWalt jobsite saw. Are you happy with the dust collection you get off of this? I have the same saw and am trying to figure out whether to get a shop vac or dust collector unit. Thanks in advance!
Re: Dust Collection & Accessories
Posted: Thu May 26, 2022 1:48 pm
by Suso
thanks Mark! I think both dust extraction systems are good, but to collect all the dust you will also have to use the blade guard and connect another pipe to that blade guard.
Re: Dust Collection & Accessories
Posted: Fri May 27, 2022 6:15 pm
by Markgould
Suso wrote: ↑Thu May 26, 2022 1:48 pm
thanks Mark! I think both dust extraction systems are good, but to collect all the dust you will also have to use the blade guard and connect another pipe to that blade guard.
Thank you! So theoretically either have the Dust Collector do a Y connection and split air to the saw exhaust and overhead, or use 2 machines...one for the overhead and another for the exhaust of the saw.
Yours is one of the few vids I see with a dust collector hooked up to a jobsite saw. What I am hearing from you is this is a viable option and you are satisfied with current performance. Hope I am tracking. Thanks for responding! I am looking forward to buying your workbench plans.