Clamping Collar Router (43mm)

Where to obtain materials and tools that I use
Suso
Posts: 1344
Joined: Thu Oct 22, 2015 4:51 pm

Clamping Collar Router (43mm)

Post by Suso » Mon Feb 01, 2016 10:09 am

The advantage of using a 43mm Clamping Collar Router is its fast installation in our homemade tools and that you can also use the same Spindle Mount with a drill that also has a 43mm Clamping Collar.

Here you'll find some examples:
3D Router:
Plunge Router
Saw Table:

These routers are hard to find outside Europe. I made this post where I will write the links I'll find. Please share if you know a differente place where to find them:

Image

Kress 1050 in America:
Buy on Usa
Buy on Usa

Sudamérica: Post con información interesante

Kress 1050 in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España






Image

Trend T4EK 850W in America:
Buy on USA
Buy on USA


Trend T4EK 850W in Europe:
Comprar en España
Buy on United Kingdom
Acquistare in Italia
Acheter en France
Kaufen in Deutschland




Image

Metabo in America:
Metabo GE710 Compact in USA


Metabo OFE 738 in Europe:
Comprar en España
Buy on United Kingdom
Acquistare in Italia
Acheter en France
Metabo GE710 Compact in Deutschland




More Router Models with 43mm Collar:
Más Fresadoras con Cuello Europeo de 43mm:

- AEG GS 500 E
- AW-FSE 500 / 1050 / 1600
- Bosch GGS 27C / GGS 28C / GGS 28LC /
- Isel UFM 500 / UFM 1050
- Kress 530-FM / 800-FME / 1050-FME / 1050-FME-1
- Kress FM 6990 E / Kress FS 6901 E
- Makita GD0600 / GD0800C
- Metabo FME 737
- Proxxon BFW 40/E
- Suhner UAC 28-F / UAC 25-F / UAC 25-RF / UAC 30-RF
- Suhner UAD 28-F / UAD 25-RF / UAD 25-RF







Image


43mm Euro Neck Spindle Mount, Bracket Clamp in America.
Buy on Usa


43mm Euro Neck Spindle Mount, Bracket Clamp in Europe.
Comprar en España
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
http://cnc-plus.de/en/Spindle-Motors--- ... cessories/

TimOD
Posts: 4
Joined: Sun May 15, 2016 11:21 pm

Clamping Collar Router (43mm)

Post by TimOD » Sun May 15, 2016 9:42 pm

I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.

METABO 710 WATT DIE GRINDERS GE 710 COMPACT

Suso
Posts: 1344
Joined: Thu Oct 22, 2015 4:51 pm

Clamping Collar Router (43mm)

Post by Suso » Wed May 18, 2016 6:27 am

wrote:I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.

METABO 710 WATT DIE GRINDERS GE 710 COMPACT


Hi!

as I never tried one of those I can't say if it would do the job. Please let me know if you try it, I am kind of curious about that Metabo tool.

Wayne6
Posts: 9
Joined: Mon Oct 31, 2016 1:01 pm

Clamping Collar Router (43mm)

Post by Wayne6 » Wed Nov 16, 2016 4:06 am

Has anyone tried out the Metabo 750 yet?

I'm interested in it as it has a 1/4" collet which is preferable. 8mm bits are very rare here which makes the Kress a difficult option (it is also very difficult to find).

The only differences that I can see between the two (apart from dimensions) is that Metabo is only 750 Watts rather than 1050 in the Kress. It does however offer a significantly higher RPM than then Kress (which is less important for working wood I guess).

Does the reduction in power output (Watts) make much of a difference? Anyone know or can comment?

Many thanks,
Wayne

Suso
Posts: 1344
Joined: Thu Oct 22, 2015 4:51 pm

Clamping Collar Router (43mm)

Post by Suso » Wed Nov 16, 2016 8:35 am

hi Wayne,
If you are not going to do very deep milling, the metabo router can do the work.
anyway, the kress also has a 1/4 and 1/8 collets!

check this out:
cnc-plus.de/en/Collets

A
Posts: 1
Joined: Mon Aug 24, 2015 8:23 am

Clamping Collar Router (43mm)

Post by A » Wed Aug 08, 2018 5:21 pm

Also available in the Netherlands:

www.bjctools.nl/merk/kress/

Samuel98
Posts: 1
Joined: Thu Oct 18, 2018 5:09 am

Re: Clamping Collar Router (43mm)

Post by Samuel98 » Thu Oct 18, 2018 5:14 am

Thank for the link suso. And your information.

v0o0gu3
Posts: 4
Joined: Mon Jun 07, 2021 10:43 pm

Re: Clamping Collar Router (43mm)

Post by v0o0gu3 » Tue Jun 08, 2021 10:58 am

Buenos días,

Estoy pensando en adquirir el Bosch GGS 28CE como fresa, aunque Bosch lo venda más como una amoladora recta, ya que la Kress AMB 1050 FME cuesta sobre 325€ y la Bosch alrededor de 200€.

Tenéis alguna opinión de ella? Gracias.

Suso
Posts: 1344
Joined: Thu Oct 22, 2015 4:51 pm

Re: Clamping Collar Router (43mm)

Post by Suso » Tue Jun 08, 2021 11:19 am

hola compañero,

en principio esa fresadora te sirve, pero con algunas consideraciones. Para empezar, creo que no tiene control de revoluciones.

La verdad y honestamente, hace años que diseñé el Workshop Portable pero si fuese hoy día lo fabricaría montando otro tipo de fresadora.

Me explico: la función de inclinar la fresador apenas se utiliza, por lo que la montaría sin esa opción. Además, las fresadoras que tienen el cuello de agarre de 43mm están bien para una CNC por ejemplo, pero están limitadas en cuanto a accesorios para usar de cualquier otra forma.

Entonces, casi seguro montaría una fresadora del tipo de la Makita RT0700C. O bien atornillando la propia base que trae la Makita a la parte inferior de la mesa, o fabricando/comprando un cuello de agarre. También existen placas de inserción de aluminio muy baratas.

Esta fresadora Makita es más versátil y tiene muchos accesorios para diversos trabajos y que podrás utilizar a mano simplemente desmontándola de la mesa.

v0o0gu3
Posts: 4
Joined: Mon Jun 07, 2021 10:43 pm

Re: Clamping Collar Router (43mm)

Post by v0o0gu3 » Tue Jun 08, 2021 12:45 pm

Gracias por la información.

Pues me aclaras varias dudas y me ahorras dinero, por que actualmente ya tengo la Bosch POF 1400 ACE y quizá tire con ella un tiempo y haga algún apaño para poder elevarla con un tornillo desde la mesa.

Un saludo.

Post Reply