Clamping Collar Router (43mm)

Where to obtain materials and tools that I use
Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Clamping Collar Router (43mm)

Post by Suso » Mon Feb 01, 2016 10:09 am

The advantage of using a 43mm Clamping Collar Router is its fast installation in our homemade tools and that you can also use the same Spindle Mount with a drill that also has a 43mm Clamping Collar.

Here you'll find some examples:
3D Router:
Plunge Router
Saw Table:

These routers are hard to find outside Europe. I made this post where I will write the links I'll find. Please share if you know a differente place where to find them:

Image

Kress 1050 in America:
Buy on Usa
Buy on Usa

Sudamérica: Post con información interesante

Kress 1050 in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Trend T4EK 850W

Post by Suso » Mon Feb 22, 2016 10:38 am


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Metabo OFE 738

Post by Suso » Mon Feb 22, 2016 10:38 am


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: 43mm Euro Neck Spindle Mount

Post by Suso » Mon Feb 22, 2016 10:38 am

Image


43mm Euro Neck Spindle Mount, Bracket Clamp in America.
Buy on Usa


43mm Euro Neck Spindle Mount, Bracket Clamp in Europe.
Comprar en España
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
http://cnc-plus.de/en/Spindle-Motors--- ... cessories/

TimOD
Posts: 4
Joined: Sun May 15, 2016 11:21 pm

Clamping Collar Router (43mm)

Post by TimOD » Sun May 15, 2016 9:42 pm

I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.

METABO 710 WATT DIE GRINDERS GE 710 COMPACT

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Clamping Collar Router (43mm)

Post by Suso » Wed May 18, 2016 6:27 am

wrote:I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.

METABO 710 WATT DIE GRINDERS GE 710 COMPACT


Hi!

as I never tried one of those I can't say if it would do the job. Please let me know if you try it, I am kind of curious about that Metabo tool.

Wayne6
Posts: 9
Joined: Mon Oct 31, 2016 1:01 pm

Clamping Collar Router (43mm)

Post by Wayne6 » Wed Nov 16, 2016 4:06 am

Has anyone tried out the Metabo 750 yet?

I'm interested in it as it has a 1/4" collet which is preferable. 8mm bits are very rare here which makes the Kress a difficult option (it is also very difficult to find).

The only differences that I can see between the two (apart from dimensions) is that Metabo is only 750 Watts rather than 1050 in the Kress. It does however offer a significantly higher RPM than then Kress (which is less important for working wood I guess).

Does the reduction in power output (Watts) make much of a difference? Anyone know or can comment?

Many thanks,
Wayne

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Clamping Collar Router (43mm)

Post by Suso » Wed Nov 16, 2016 8:35 am

hi Wayne,
If you are not going to do very deep milling, the metabo router can do the work.
anyway, the kress also has a 1/4 and 1/8 collets!

check this out:
cnc-plus.de/en/Collets

A
Posts: 1
Joined: Mon Aug 24, 2015 8:23 am

Clamping Collar Router (43mm)

Post by A » Wed Aug 08, 2018 5:21 pm

Also available in the Netherlands:

www.bjctools.nl/merk/kress/

Samuel98
Posts: 1
Joined: Thu Oct 18, 2018 5:09 am

Re: Clamping Collar Router (43mm)

Post by Samuel98 » Thu Oct 18, 2018 5:14 am

Thank for the link suso. And your information.

Post Reply