Page 1 of 2
Clamping Collar Router (43mm)
Posted: Mon Feb 01, 2016 10:09 am
by Suso
The advantage of using a 43mm Clamping Collar Router is its fast installation in our homemade tools and that you can also use the same Spindle Mount with a drill that also has a 43mm Clamping Collar.
Here you'll find some examples:
3D Router:
Plunge Router
Saw Table:
These routers are hard to find outside Europe. I made this post where I will write the links I'll find. Please share if you know a differente place where to find them:
Kress 1050 in America:
Buy on Usa
Buy on Usa
Sudamérica:
Post con información interesante
Kress 1050 in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España
Re: Trend T4EK 850W
Posted: Mon Feb 22, 2016 10:38 am
by Suso
Re: Metabo OFE 738
Posted: Mon Feb 22, 2016 10:38 am
by Suso
Re: 43mm Euro Neck Spindle Mount
Posted: Mon Feb 22, 2016 10:38 am
by Suso
Clamping Collar Router (43mm)
Posted: Sun May 15, 2016 9:42 pm
by TimOD
I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.
METABO 710 WATT DIE GRINDERS GE 710 COMPACT
Clamping Collar Router (43mm)
Posted: Wed May 18, 2016 6:27 am
by Suso
wrote:I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.
METABO 710 WATT DIE GRINDERS GE 710 COMPACT
Hi!
as I never tried one of those I can't say if it would do the job. Please let me know if you try it, I am kind of curious about that Metabo tool.
Clamping Collar Router (43mm)
Posted: Wed Nov 16, 2016 4:06 am
by Wayne6
Has anyone tried out the Metabo 750 yet?
I'm interested in it as it has a 1/4" collet which is preferable. 8mm bits are very rare here which makes the Kress a difficult option (it is also very difficult to find).
The only differences that I can see between the two (apart from dimensions) is that Metabo is only 750 Watts rather than 1050 in the Kress. It does however offer a significantly higher RPM than then Kress (which is less important for working wood I guess).
Does the reduction in power output (Watts) make much of a difference? Anyone know or can comment?
Many thanks,
Wayne
Clamping Collar Router (43mm)
Posted: Wed Nov 16, 2016 8:35 am
by Suso
hi Wayne,
If you are not going to do very deep milling, the metabo router can do the work.
anyway, the kress also has a 1/4 and 1/8 collets!
check this out:
cnc-plus.de/en/Collets
Clamping Collar Router (43mm)
Posted: Wed Aug 08, 2018 5:21 pm
by A
Also available in the Netherlands:
www.bjctools.nl/merk/kress/
Re: Clamping Collar Router (43mm)
Posted: Thu Oct 18, 2018 5:14 am
by Samuel98
Thank for the link suso. And your information.