Clamping Collar Router (43mm)

[Suso]

The advantage of using a 43mm Clamping Collar Router is its fast installation in our homemade tools and that you can also use the same Spindle Mount with a drill that also has a 43mm Clamping Collar.

Here you'll find some examples:
3D Router:
Plunge Router
Saw Table:

These routers are hard to find outside Europe. I made this post where I will write the links I'll find. Please share if you know a differente place where to find them:



Kress 1050 in America:
Buy on Usa
Buy on Usa

Sudamérica: Post con información interesante

Kress 1050 in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España








Trend T4EK 850W in America:
Buy on USA
Buy on USA


Trend T4EK 850W in Europe:
Comprar en España
Buy on United Kingdom
Acquistare in Italia
Acheter en France
Kaufen in Deutschland






Metabo in America:
Metabo GE710 Compact in USA


Metabo OFE 738 in Europe:
Comprar en España
Buy on United Kingdom
Acquistare in Italia
Acheter en France
Metabo GE710 Compact in Deutschland









43mm Euro Neck Spindle Mount, Bracket Clamp in America.
Buy on Usa


43mm Euro Neck Spindle Mount, Bracket Clamp in Europe.
Comprar en España
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
http://cnc-plus.de/en/Spindle-Motors--- ... cessories/

[TimOD]

I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.

METABO 710 WATT DIE GRINDERS GE 710 COMPACT

[Suso]

I'm looking at the Metabo GE 710 compact die grinder...the collar is listed at 1 11/16" which equals 43mm. 1/4" collet (same as a router), variable speed, 6.4 amp motor...around $200 from Amazon.

METABO 710 WATT DIE GRINDERS GE 710 COMPACT

Hi!

as I never tried one of those I can't say if it would do the job. Please let me know if you try it, I am kind of curious about that Metabo tool.

[Wayne6]

Has anyone tried out the Metabo 750 yet?

I'm interested in it as it has a 1/4" collet which is preferable. 8mm bits are very rare here which makes the Kress a difficult option (it is also very difficult to find).

The only differences that I can see between the two (apart from dimensions) is that Metabo is only 750 Watts rather than 1050 in the Kress. It does however offer a significantly higher RPM than then Kress (which is less important for working wood I guess).

Does the reduction in power output (Watts) make much of a difference? Anyone know or can comment?

Many thanks,
Wayne

[Suso]

hi Wayne,
If you are not going to do very deep milling, the metabo router can do the work.
anyway, the kress also has a 1/4 and 1/8 collets!

check this out:
cnc-plus.de/en/Collets

[A]

Also available in the Netherlands:

www.bjctools.nl/merk/kress/

[Samuel98]

Thank for the link suso. And your information.