Table Saw Blades (CMT)

Where to obtain materials and tools that I use
Post Reply
Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Table Saw Blades (CMT)

Post by Suso » Mon Feb 01, 2016 10:51 am

The two things you should take into account when buying a blade for your circular saw or table saw is the maximum diameter that your tool can be equipped with and the diameter of the shaft. CMT usually has three blades like the one in the picture below for each diameter.

1- One with few teeth to rip solid wood lengthwise; this blade does not make fine or clean cuts.

2- Another with lots of teeth to make crosscuts in solid wood. Also for all kinds of cuts in MDF, plywood boards or boards with melamine achieving very fine cuts.

3-Finally, there's another blade with a medium number of teeth which could make most types of cuts, without being as good at the aforementioned cuts.

Ideally you should have all three blades so that you switch between them for each kind of cut, but if you can't buy all three, the medium one is the best option. To figure out the number of teeth, look at the "Z" reference (Z24, Z40, Z60, Z80). Here's an article with more info:
And here another article:



Español: Lo primero que debes tener en cuenta para comprar un disco para tu circular de mano o sierra de mesa es el diámetro máximo de disco que tu herramienta puede montar y el diámetro del eje. CMT suele tener tres discos como el de la foto que puedes ver abajo para cada diámetro. Uno con pocos dientes para cortar o abrir madera maciza a lo largo de la veta, este disco no deja un corte limpio o fino. Otro con muchos dientes para cortar madera maciza de cabeza o para cortar tableros contrachapados, DM o tableros con melamina, con el que se consigue un corte muy fino. Finalmente tienen otro con un número de dientes intermedio que serviría un poco para todo tipo de cortes pero sin llegar a ser tan bueno para cada tipo de corte que he mencionado. Lo ideal sería tener los tres discos para intercambiar en cada tipo de corte, pero si no puedes comprar los tres, el intermedio es la mejor opción. Para averiguar el número de dientes debes fijarte en la referencia Z (Z24, Z40, Z60, Z80...)
Aquí encontrarás un artículo con más info:
Y aquí otro artículo con más info:

Image

Mine
(250mm diameter ) 272.250.60M( ref)
(235mm diameter ) 271.235.36M( ref)
(190mm diameter) 271.190.24M( ref)

CMT Saw Blade in America:
Buy on Usa
https://www.cmtorangetools.com/na-en/

CMT Saw Blade in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland

Comprar en España
https://www.tienda-cmt.com/es/discos-si ... do-1020908

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

CMT Table Saw Dado Blade

Post by Suso » Wed Feb 03, 2016 9:56 am

Image

CMT 230.520.06 Dado Blade. Perfect dado blade for low power bench saws with a shaft of 15,87mm (5/8-Inch).
Cut all sizes from 6,35mm (1/4") to 23mm (29/32").

Article about Dado Blades on the blog:


CMT 230.520.06 Dado Blade in America:
Buy on Usa


CMT 230.520.06 Dado Blade in Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland


Disco Dado CMT 230.520.06 en España:
Comprar en España

Artículo sobre discos dado en el blog:

Disco dado perfecto para sierras de banco de baja potencia y con eje de 5/8"(15,87mm)

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Table Saw Blades Industrial Degreaser

Post by Suso » Fri Feb 05, 2016 11:37 am

Image
Industrial Degreaser ( Any powerful degreaser will clean your Drill Bits, Router Bits and Saw Blades)

Industrial Degreaser America:
Buy on Usa


Industrial Degreaser Europe:
Acquistare in Italia
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España

Dan P
Posts: 1
Joined: Sun Aug 14, 2016 3:54 pm

Saw Disk (CMT)

Post by Dan P » Sun Aug 14, 2016 1:58 pm

Check out Pazos in madrid and also on line
They have everything for DIY and woodworking
http://www.comercialpazos.com/

Michael7
Posts: 1
Joined: Sat Feb 27, 2016 10:59 am

Saw Disk (CMT)

Post by Michael7 » Sun Dec 18, 2016 8:00 am

I ordered the disk there
http://www.venditautensili.it
Very friendly and fast delivery and price was OK too

Post Reply