18 mm and 9 mm plywood?

René1 · Post by **René1** » Fri Apr 08, 2016 5:04 am

Hi there,

I have a question regarding the cutting list in "Cutting List > MaxCut > 18mm Plywood CSV".

In the CSV there are some 9 mm plywood parts. Let's take part no. 26 for example.
In the image Export 1.Png you can find the part no. 26 but you can also find parts which are 18 mm.
But 9 mm and 18 mm parts can't be on the same plywood sheet, or am I wrong?

Maybe the 9 mm plywood in the CSV is wrong, and everything should be 18 mm?
(Or maybe I just don't understand...)

Best
René

René1 · Post by **René1** » Fri Apr 08, 2016 5:23 am

Ok, I think I can answer myself now.

Part 26 is part of the router holder.
And it isused in 9 mm AND 18 mm.
And they are glued/screwed together to get a 27 mm thick part.

Post by **Suso** » Fri Apr 08, 2016 4:15 pm

wrote:Ok, I think I can answer myself now.

Part 26 is part of the router holder.
And it isused in 9 mm AND 18 mm.
And they are glued/screwed together to get a 27 mm thick part.

You are right! are two glued pieces, 18 and 9mm