Router

koracoeur · Post by **koracoeur** » Sat Jan 14, 2017 10:53 am

Hello suso,
First I want to thank you for this wonderful site of sharing with so much wealth in the information that you give and in its availability.
I appreciate very much your neat work and your ideas which are really simple to my taste.
I want to know where to find a router as on your videos.
If you have a link I would be delighted.
I plan to manufacture the portable workshop as well as the 3D router !!!
But for the moment budget I just made the router carrier under table without plan just by deduction and with a lot of modifications because I have only one big router.
Keep on sharing your passion.
Many thanks's
Jérôme Cordova

Post by **Suso** » Sat Jan 14, 2017 4:41 pm

hi Jérôme,
thanks for your kind words!
I think you mean the Kress 1050 router, it is easy to find in europe, dont worry about it!
take a look at this post:

koracoeur · Post by **koracoeur** » Sun Jan 15, 2017 8:30 pm

Wow thanks,
I did not think it would be so expensive !!!
I will wait a little !!
thanks again

koracoeur · Post by **koracoeur** » Sun Jan 15, 2017 8:41 pm

one question again!!!
how can i do to post some pics on the blog for portable worshop??

Post by **Suso** » Mon Jan 16, 2017 1:15 pm

You can publish your photos whenever you want!

koracoeur · Post by **koracoeur** » Mon Jan 16, 2017 7:18 pm

Hello Suso,
Here is the router in its block as you kindly showed it on your site.
I did without the ribs and I had to adapt a router much bigger than yours and less practical but I got there.
I insatled him under a small table while waiting to make the workshop portable.
For the portable workshop I will do without the ribs too.
With feeling and a little refliliation but especially a lot of viewing I will get there, I believe !!!
Later I would go for the 3D router and there I would buy the plans!
I hope that and I suppose you must be glad to see how you inspire the others!
thanks again
Blessing
Jérôme Cordova

Post by **Suso** » Tue Jan 17, 2017 9:31 am

It looks like a very well done job! I like how you have adapted the lifting system of the router, I hope everything goes well!
Would be a great help to other users if you continue to share your progress and pics in this thread!

nigel6 · Post by **nigel6** » Sat Feb 11, 2017 7:30 pm

Bosch POF 500 and POF 600 are quite old routers but still very adequate and they both have 43mm collar. they can be see on Ebay for between £25 and £35 pounds