Saw top has a bend a few weeks after building it

Discuss topics related to the Portable Workshop
Post Reply
fer662
Posts: 16
Joined: Tue Jun 27, 2017 3:00 am

Saw top has a bend a few weeks after building it

Post by fer662 » Wed Nov 01, 2017 6:04 pm

How should I deal with this? I'm already using the most decent plywood i can get here. Would any other material be better?

Suso
Posts: 1322
Joined: Thu Oct 22, 2015 4:51 pm

Saw top has a bend a few weeks after building it

Post by Suso » Thu Nov 02, 2017 3:06 pm

hi Fernando,
you should not have problems if you have used a quality plywood. Could you share some pics?

fer662
Posts: 16
Joined: Tue Jun 27, 2017 3:00 am

Saw top has a bend a few weeks after building it

Post by fer662 » Thu Nov 02, 2017 3:47 pm

Es plywood de pino 18mm. Tiene 2.5mm de caida en el medio mas o menos, creo que todavia es rescatable. Pensaba ver si le puedo poner 2 angulos de hierro a lo largo a ver si con eso queda:

Image

Image

Image

Suso
Posts: 1322
Joined: Thu Oct 22, 2015 4:51 pm

Saw top has a bend a few weeks after building it

Post by Suso » Thu Nov 02, 2017 3:56 pm

hola de nuevo Fernando,
eso era precisamente lo que te iba a comentar! un par de "eles" de acero deberían solucionar este problema. Es cierto que el plywood de pino no es tan duro y estable como el de abedul, pero aún así no deberías tener este problema, es raro.

Por favor, saca unas fotos de cómo y donde colocas los refuerzos para compartir aquí es este post, esto podría ayudar a otros con el mismo problema.

un saludo y muchas gracias;
Suso

Post Reply