El trespa podrías buscarlo en alguna carpintería de las que montan tiendas o mobiliario de piscinas, y pedir que te vendan un trocito, con suerte te lo regalarán, como me ha pasado a mi! De todas formas como te dije valdría madera.
Para ganar 12cm, yo no correría riesgos, y el trabajo de volver a replantear todo!
Esas guías T Track tienen muy buena pinta! no las había visto en ese portal, y eso que he mirado más de una vez. Están muy bien de precio, ya me dirás que tal si llegas a comprarlas.
Some questions for Project construction
-
- Posts: 8
- Joined: Tue Sep 20, 2016 7:30 pm
Some questions for Project construction
HI Suso;
I've started building the machine!
To the 5cm screws the guide driling holes should have 2mm ?
The only materials still missing is the chanel... Any sugestions how to find them in Portugal?!
Thanks
I've started building the machine!
To the 5cm screws the guide driling holes should have 2mm ?
The only materials still missing is the chanel... Any sugestions how to find them in Portugal?!
Thanks
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
wrote:HI Suso;
I've started building the machine!
To the 5cm screws the guide driling holes should have 2mm ?
The only materials still missing is the chanel... Any sugestions how to find them in Portugal?!
Thanks
hi,
I bought the guide here, is the best price we've found and the shipping costs to Spain and Portugal are reasonable.
I don´t understand what you mean in the first question, can you send me a pic?
-
- Posts: 8
- Joined: Tue Sep 20, 2016 7:30 pm
Some questions for Project construction
Can you please tell me how many items i need of each Product of that website? (Example 2 x Bestell Nr. 314550 and 1 Bestell Nr. 314222)
Before inserting the screws you do drill holes where the screw goes in...
In your project you use wood screws with 5cm long
for example the base from the machine
The prehole to the screws is with a 2mm drillbit ?
Sorry if im not explaining myself properly...im new to this things :D but its going well i think take a look:
I've already the rest of the wood ready, when the rest is done i'll send pictures :-)
Before inserting the screws you do drill holes where the screw goes in...
In your project you use wood screws with 5cm long
for example the base from the machine
The prehole to the screws is with a 2mm drillbit ?
Sorry if im not explaining myself properly...im new to this things :D but its going well i think take a look:
I've already the rest of the wood ready, when the rest is done i'll send pictures :-)
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
Now I understand, you should always drill with a drill bit that is one millimeter less diameter than the screw you use.
you will need two of these: 314550
and two of these: 314560
It seems a good job! you could open a thread in this forum
you will need two of these: 314550
and two of these: 314560
It seems a good job! you could open a thread in this forum