Some questions for Project construction
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
Hi Gianvador:
For your garage-workshop I`d go with the fist one too!
For your garage-workshop I`d go with the fist one too!
-
- Posts: 1
- Joined: Fri Mar 11, 2016 5:39 pm
Some questions for Project construction
Hey,
I have another question about the plywood sheets. In the "plans" video, i can see youre using three sheets. What are the dimensions of these? 2500x1500?
Greets!
I have another question about the plywood sheets. In the "plans" video, i can see youre using three sheets. What are the dimensions of these? 2500x1500?
Greets!
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
Hi Jork:
Usually the dimensions of this sheets is 2500X1250mm
Usually the dimensions of this sheets is 2500X1250mm
-
- Posts: 6
- Joined: Thu Feb 18, 2016 9:56 am
Some questions for Project construction
hello I wanted to ask where I can find the tool to make holes for the anchors , the project is coming really well , look your daniele hello response
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
Hi,
If you are talking about the threaded inserts, you can do it with a regular drill bit
Drill diameter = "E"
Hole Deep = "C"
If you are talking about the threaded inserts, you can do it with a regular drill bit
Drill diameter = "E"
Hole Deep = "C"
-
- Posts: 6
- Joined: Thu Feb 18, 2016 9:56 am
Some questions for Project construction
No, I did not mean those threaded , but the tool that is seen in the video to put those wooden
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
Hi,
I am making a video showing how to make a dowel jig!
I think it will be ready in a few days
I am making a video showing how to make a dowel jig!
I think it will be ready in a few days
-
- Posts: 6
- Joined: Thu Feb 18, 2016 9:56 am
Some questions for Project construction
I believed that you had bought , still looks the video hello daniele
-
- Posts: 5
- Joined: Sun May 29, 2016 8:32 pm
Some questions for Project construction
wrote:Hi,
If you are talking about the threaded inserts, you can do it with a regular drill bit
Drill diameter = "E"
Hole Deep = "C"
Hi i have buy these inserts m8x25mm can i use them? I can to cut a little the final part (on 18 mm wood)
Excuse my english :-)
-
- Posts: 2243
- Joined: Thu Oct 22, 2015 4:51 pm
Some questions for Project construction
Hi,
They may be worth, you must cut up 18mm
They may be worth, you must cut up 18mm