Where to Find Wheels

Discuss topics related to the Portable Workshop
HerrLux
Posts: 4
Joined: Tue Feb 28, 2023 12:50 pm

Re: Where to Find Wheels

Post by HerrLux » Tue Feb 28, 2023 12:56 pm

Hey everyone,

I don't see a way to lower or rise the castor wheels when the workbench is placed at a wall and two modules are joint together to make a longer workbench or when a module should be placed in a corner because you can't reach the wheels anymore. Right?

That would mean when using caster wheels you can only place a single module at a wall and have to make sure it's not in a corner or you use multiple modules in the middle of the workshop.

Am I overseeing something here?

Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: Where to Find Wheels

Post by Suso » Tue Feb 28, 2023 1:53 pm

hi HerrLux ,

It's the problem with these wheels. In my case I have noticed that just lowering the pad of the front wheels a little is enough to block the modules. You can also screw some stops to the wall to block them.

HerrLux
Posts: 4
Joined: Tue Feb 28, 2023 12:50 pm

Re: Where to Find Wheels

Post by HerrLux » Tue Feb 28, 2023 6:05 pm

Thanks Suso!

I was thinking if something like this would be a solution in my case:
https://www.youtube.com/watch?v=MrtiDfJGlhE

However, if I join two modules together on the short side, again I won't be able to reach the mechanism.

So I guess I will go with your proposed solution and install some stops on the wall

Post Reply