Start to build my Portable Workshop!

Discuss topics related to the Portable Workshop
Thomas6
Posts: 21
Joined: Wed Mar 02, 2016 5:17 pm

Start to build my Portable Workshop!

Post by Thomas6 » Thu Apr 21, 2016 2:46 pm

Hello Kikerumbo,

[quote]Can I ask you what was the total cost at the end of the project, without the power tools? [/quote]
i have payed for all plywood (9mm and 18mm) ca. 140,- € and for Screws ca. 60.- €.
For the two Incra Milter and Slider ca. 85.- €, 11.-€ for two Wheels and for the two Switches ca. 9.-€ (Ebay).

Thomas6
Posts: 21
Joined: Wed Mar 02, 2016 5:17 pm

Start to build my Portable Workshop!

Post by Thomas6 » Thu Apr 21, 2016 3:09 pm

Hello Bart,

the white plate called in German language Polyethylen (PE-HD), in english polyethylene!
I bought the 3 mm plate from a small plastic dealer in the near of my home.
The Incra Miter and Slider Channel have i bought here: feinewerkzeuge.
And the treaded inserts have i bought in a German property market (Obi). Manufacturer is the company Hettich. I you live near Aachen (aken; aix), you can go to OBI (OBI Markt Aachen
Roermonder Str. 177-185, 52072 Aachen)

Bart De Worm
Posts: 6
Joined: Fri Feb 26, 2016 3:33 pm

Start to build my Portable Workshop!

Post by Bart De Worm » Fri Apr 22, 2016 10:10 am

And the metric tape, where did you bought it?
Is it something like this?
Thx!
Bart

Thomas6
Posts: 21
Joined: Wed Mar 02, 2016 5:17 pm

Start to build my Portable Workshop!

Post by Thomas6 » Fri Apr 22, 2016 1:16 pm

I think it is the same. I bought the metric tape here: fine-tools

Bart De Worm
Posts: 6
Joined: Fri Feb 26, 2016 3:33 pm

Start to build my Portable Workshop!

Post by Bart De Worm » Wed Apr 27, 2016 5:07 am

Is the metric tape only used on the base of the workshop and the table saw sled?
So i have to buy 2x left-right and 2x right-left? With the maximum length op the workshop table?

Thx!
Bart

info@paoson
Posts: 43
Joined: Thu Oct 15, 2015 5:35 pm

Start to build my Portable Workshop!

Post by info@paoson » Wed Apr 27, 2016 6:58 am

wrote:Is the metric tape only used on the base of the workshop and the table saw sled?
So i have to buy 2x left-right and 2x right-left? With the maximum length op the workshop table?


You'll need only one left-right and one right-left. The length you need is 70cm

Bart De Worm
Posts: 6
Joined: Fri Feb 26, 2016 3:33 pm

Start to build my Portable Workshop!

Post by Bart De Worm » Wed Apr 27, 2016 7:15 am


Chasrlie
Posts: 3
Joined: Thu Jun 02, 2016 3:10 am

Start to build my Portable Workshop!

Post by Chasrlie » Thu Jun 02, 2016 4:03 am

hallo tomas
ich bin aus NDS
Habe heute die Pläne bestelt .musste deswegen um die 06:00 zu Bank um mein paypal aufladen damit es bezahlt wird.
Leider kann ich kein englisch und bin auch Frischling bei solcher dingen.Möchte aber umbeding den Tisch bauen
als Grundplatte für die Werkzeuge nehme ich Alu-Verbundplatten auch Dibond genannt werden. allerding weis ich nicht ob es in gewünschen stärke bekommen werde.

Chasrlie
Posts: 3
Joined: Thu Jun 02, 2016 3:10 am

Start to build my Portable Workshop!

Post by Chasrlie » Thu Jun 02, 2016 4:31 am

hi Thomas,
habe die Fotos betrachtet sicht eht klasse aus
aus welcher richtung bist du den bitte?

Thomas6
Posts: 21
Joined: Wed Mar 02, 2016 5:17 pm

Start to build my Portable Workshop!

Post by Thomas6 » Thu Jun 02, 2016 2:21 pm

Hallo,
vielen Dank für die Komplimente.
Zu den Materialien die du verwenden möchtest, kann ich nichts sagen, da ich sie nicht kenne!
Ich bin aus dem Großraum Köln.

Grüße
Thomas

Post Reply