Lathe & Disc Sander presentation

Discuss topics related to the Lathe & Sanding Station
Suso
Posts: 972
Joined: Thu Oct 22, 2015 4:51 pm

Lathe & Disc Sander presentation

Post by Suso » Fri Oct 28, 2016 6:46 am

Image

A lathe made completely with birch plywood. As you can see, I've also attached a disc sander on the left side to take advantage of the motor's rotation!
More info on Blog

Se trata de un torno fabricado totalmente en contrachapado de abedul. Como podéis ver, aprovechando el giro del motor también he acoplado un disco de lijado en el lado izquierdo!

James16
Posts: 3
Joined: Fri Aug 19, 2016 5:15 pm

Lathe & Disc Sander presentation

Post by James16 » Fri Oct 28, 2016 9:52 am

Hello,

Thank you for this project but where can I found electric motor ?

Suso
Posts: 972
Joined: Thu Oct 22, 2015 4:51 pm

Lathe & Disc Sander presentation

Post by Suso » Fri Oct 28, 2016 12:26 pm

hi James,
at any motor supplier! I used a 1HP single-phase motor. Where you from?

James16
Posts: 3
Joined: Fri Aug 19, 2016 5:15 pm

Lathe & Disc Sander presentation

Post by James16 » Tue Nov 01, 2016 6:01 pm

I live in France.

fturiot
Posts: 1
Joined: Tue Nov 01, 2016 5:47 pm

Lathe & Disc Sander presentation

Post by fturiot » Thu Nov 03, 2016 7:05 am

this is good or not ?
amazon.fr

Suso
Posts: 972
Joined: Thu Oct 22, 2015 4:51 pm

Lathe & Disc Sander presentation

Post by Suso » Thu Nov 03, 2016 8:15 am

hi Frederic,
that motor has too many revolutions, I install a single-stage 1HP motor with 1500 Rpm.

you will need something like this:
moteur-electrique-en-ligne.fr

moteurselectriques.fr

in Germany

Doug6
Posts: 1
Joined: Sat Nov 12, 2016 6:46 pm

Lathe & Disc Sander presentation

Post by Doug6 » Sat Nov 12, 2016 5:49 pm

Your tools are incredible! I want to build them all. What made you decide to build instead of buy these tools?

Suso
Posts: 972
Joined: Thu Oct 22, 2015 4:51 pm

Lathe & Disc Sander presentation

Post by Suso » Mon Nov 14, 2016 8:57 am

hi Doug
are several reasons...
- to save money.
- for fun.
- because I like to add functions that do not exist in the market.
- If I have breakdowns, they will be easy to solve for me!
- I can adapt the tools to my needs...

thanks!

Joram
Posts: 2
Joined: Mon Nov 14, 2016 7:41 pm

Lathe & Disc Sander presentation

Post by Joram » Mon Nov 14, 2016 11:49 pm

Good day,

Could you tell me when to expect the plans for the Lathe&Sanding disc online?

Suso
Posts: 972
Joined: Thu Oct 22, 2015 4:51 pm

Lathe & Disc Sander presentation

Post by Suso » Tue Nov 15, 2016 8:35 am

wrote:Good day,

Could you tell me when to expect the plans for the Lathe&Sanding disc online?



hi Joram,
I'm working on it! tomorrow they'll be ready.

Post Reply