BandSaw Upgrades

Discuss topics related to the homemade Band Saw
Post Reply
Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

BandSaw Upgrades

Post by Suso » Thu May 09, 2019 12:13 pm

After using my homemade band saw for a year, I’ve decided I should make some improvements. Back when I built it I used teflon to make the blade guides, but I don’t think this material is hard enough for this purpose.

I’ll use some pieces of HPL to make them again. It’s a very hard material, and it’s ideal for a guide. For the upper part of the tabletop I’ll use another HPL board I had lying around in my workshop.

here you'll find the blog article:

Image

Image

Image



Post Reply