Page 1 of 1

BandSaw Upgrades

Posted: Thu May 09, 2019 12:13 pm
by Suso
After using my homemade band saw for a year, I’ve decided I should make some improvements. Back when I built it I used teflon to make the blade guides, but I don’t think this material is hard enough for this purpose.

I’ll use some pieces of HPL to make them again. It’s a very hard material, and it’s ideal for a guide. For the upper part of the tabletop I’ll use another HPL board I had lying around in my workshop.

here you'll find the blog article:

Image

Image

Image