Best Metal cutting countersink

Discuss topics related to Woodworking Techniques & Tips
Post Reply
Al_Brassell

Best Metal cutting countersink

Post by Al_Brassell » Thu Jan 30, 2020 3:35 pm

I have some steel bar stock that I need to use as runners on my INCA table saw. I have drilled holes for the screws and attempted to drill countersinks. I found that my bits immediately wore down and were apparently only meant for wood. I need to find a countersink bit that is made specifically to cut metal. I would appreciate recommendations.

Thanks,

Al Brassell
904.728.6213 //mobile
al@albrassell.com
www.albrassell.com

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Best Metal cutting countersink

Post by Suso » Thu Jan 30, 2020 4:16 pm

hello again Al!
these hole countersink bits are special for metal work,try to buy a quality one:

Image
Countersink Drill 10-15mm Bit 90°

Countersink Drill Bit 10-15mm 90° in America:
Buy on Usa


Countersink Drill Bit 10-15mm 90° in Europe:
Acquistare in Italia
Acheter en France
Acheter en France
Buy on United Kingdom
Kaufen in Deutschland
Comprar en España

Al_Brassell

Re: Best Metal cutting countersink

Post by Al_Brassell » Fri Jan 31, 2020 4:01 am

Hi Suso, thanks for remembering me. What is a brand name of a bit of good quality?

Al

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Best Metal cutting countersink

Post by Suso » Fri Jan 31, 2020 9:32 am

ok, I know a few:

Cmt

Bluemaster

this kind of bits also work well

Post Reply