Modular Workbench & Mobile Tool Stand

[tanzelmo@gmail.com]

Mr Paoson

The vice spec'd in the plans do not match the vice you used in the videos. I have 2 questions:

1) Can you specify what vice(s) match the parts Vice1-Vice3 in the plans?
2) Can you provide then cut list used for the the vice from the videos?

Thanks in advance
Tony

[Suso]

hi tanzelmo,

the vise that I used in the videos is quite expensive and difficult to find in Europe, that's why I used a more common one in the plans. It's this vise. There are several similar vises on the market, if you use another one, check the measurements.

This is the vise I used in the videos, it is the 14 inch version. The vise comes with the mounting specifications, it depends on the type of worktop you use and other things that I no longer remember!

[tanzelmo@gmail.com]

Thanks!