Mr Paoson
The vice spec'd in the plans do not match the vice you used in the videos. I have 2 questions:
1) Can you specify what vice(s) match the parts Vice1-Vice3 in the plans?
2) Can you provide then cut list used for the the vice from the videos?
Thanks in advance
Tony
Modular Workbench & Mobile Tool Stand
-
- Posts: 5
- Joined: Fri Oct 28, 2022 6:28 pm
-
- Posts: 2247
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Modular Workbench & Mobile Tool Stand
hi tanzelmo,
the vise that I used in the videos is quite expensive and difficult to find in Europe, that's why I used a more common one in the plans. It's this vise. There are several similar vises on the market, if you use another one, check the measurements.
This is the vise I used in the videos, it is the 14 inch version. The vise comes with the mounting specifications, it depends on the type of worktop you use and other things that I no longer remember!
the vise that I used in the videos is quite expensive and difficult to find in Europe, that's why I used a more common one in the plans. It's this vise. There are several similar vises on the market, if you use another one, check the measurements.
This is the vise I used in the videos, it is the 14 inch version. The vise comes with the mounting specifications, it depends on the type of worktop you use and other things that I no longer remember!
-
- Posts: 5
- Joined: Fri Oct 28, 2022 6:28 pm