Cut list yardage

Discuss topics related to the Multi-Function Workbench
Post Reply
Dreamer666
Posts: 2
Joined: Tue Jan 19, 2021 11:07 pm

Cut list yardage

Post by Dreamer666 » Tue Jan 19, 2021 11:12 pm

Hi.
Is it possible to get info about how much material are used in the modular work bench?
I’m very interested but curious as to how much it will cost me to buy all of the materials..
some of the materials can be hard to find here depending on mm vs inch measurements..
Thanks in advance!

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Cut list yardage

Post by Suso » Wed Jan 20, 2021 8:48 am

hi, more or less this is the necessary boards:

1X 9mm Soft Plywood
1X 15mm Soft Plywood
1X 18mm Hard Plywood

to this you must add the material you are going to use for the lid, which is 1000x600mm

Here you'll find more info about the plans:

And here more info about woodworking boards:

Dreamer666
Posts: 2
Joined: Tue Jan 19, 2021 11:07 pm

Re: Cut list yardage

Post by Dreamer666 » Thu Jan 21, 2021 10:07 pm

Thanks very much.
With “1x” you mean 1200mmx2400mm?

Best regards.

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Cut list yardage

Post by Suso » Thu Jan 21, 2021 11:01 pm

here the boards are a bit bigger: 2500 x 1250mm

Splurt
Posts: 1
Joined: Wed Jul 14, 2021 7:55 am

Re: Cut list yardage

Post by Splurt » Wed Jul 14, 2021 7:59 am

Here in Sweden, the boards are also 1200 x 2400 mm. Will you cut list work with these measurements too?

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Cut list yardage

Post by Suso » Wed Jul 14, 2021 8:17 am

Splurt wrote:
Wed Jul 14, 2021 7:59 am
Here in Sweden, the boards are also 1200 x 2400 mm. Will you cut list work with these measurements too?
you will need to change some settings in Maxcut, create a new board with those measurements and reoptimize the cuts. More info:

Post Reply