Page 1 of 1

Cut list yardage

Posted: Tue Jan 19, 2021 11:12 pm
by Dreamer666
Hi.
Is it possible to get info about how much material are used in the modular work bench?
Iā€™m very interested but curious as to how much it will cost me to buy all of the materials..
some of the materials can be hard to find here depending on mm vs inch measurements..
Thanks in advance!

Re: Cut list yardage

Posted: Wed Jan 20, 2021 8:48 am
by Suso
hi, more or less this is the necessary boards:

1X 9mm Soft Plywood
1X 15mm Soft Plywood
1X 18mm Hard Plywood

to this you must add the material you are going to use for the lid, which is 1000x600mm

Here you'll find more info about the plans:

And here more info about woodworking boards:

Re: Cut list yardage

Posted: Thu Jan 21, 2021 10:07 pm
by Dreamer666
Thanks very much.
With ā€œ1xā€ you mean 1200mmx2400mm?

Best regards.

Re: Cut list yardage

Posted: Thu Jan 21, 2021 11:01 pm
by Suso
here the boards are a bit bigger: 2500 x 1250mm

Re: Cut list yardage

Posted: Wed Jul 14, 2021 7:59 am
by Splurt
Here in Sweden, the boards are also 1200 x 2400 mm. Will you cut list work with these measurements too?

Re: Cut list yardage

Posted: Wed Jul 14, 2021 8:17 am
by Suso
Splurt wrote: ā†‘
Wed Jul 14, 2021 7:59 am
Here in Sweden, the boards are also 1200 x 2400 mm. Will you cut list work with these measurements too?
you will need to change some settings in Maxcut, create a new board with those measurements and reoptimize the cuts. More info: