Vise for workbench

Discuss topics related to the Multi-Function Workbench
Post Reply
steph34
Posts: 1
Joined: Mon Feb 01, 2021 3:03 pm

Vise for workbench

Post by steph34 » Mon Feb 01, 2021 3:10 pm

I would like to know where I can purcase the Vise shown in the video "Rip Cut Guide / Workbench Build Part 2" the smal one; As I have purchase the plan but the link for the vise is showing the big one shown in a video "Construction d'établi modulaire et de support d'outils mobile (Ep.2)" . thanks for your help.
Attachments
Vise.PNG
Vise.PNG (181.47 KiB) Viewed 33538 times

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: vise for workbench

Post by Suso » Mon Feb 01, 2021 4:03 pm

hi, where are you from?
have you searched in online stores of your country for this reference?

"Anke Neutechnik AK900302"

Grizoo
Posts: 3
Joined: Thu Jan 13, 2022 9:56 am

Re: vise for workbench

Post by Grizoo » Thu Jul 07, 2022 3:40 am

Hi Suso, why don't you attach the vice directly to the worktop?

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: vise for workbench

Post by Suso » Thu Jul 07, 2022 8:17 am

hi Grizoo,
it could be done that way, but I wanted to get a little more distance between the steel bars of the vise and the top of the workbench.

HerrLux
Posts: 4
Joined: Tue Feb 28, 2023 12:50 pm

Re: vise for workbench

Post by HerrLux » Thu Apr 20, 2023 12:24 pm

Hi suso,
you placed the vise on the right side and I asume that is the usual/best for right handed people.
For left handed folks it would then make more sense to place it on the left side and the "connector" to attach a second mobile workbench on the right side. Is that correct?

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: vise for workbench

Post by Suso » Thu Apr 20, 2023 1:42 pm

hi HerrLux,
I don't think there is a single answer to this question. It also depends on where you are going to place the bench, if you are going to place it against a wall or the space available on each side of the bench.
Check this out:
Check this out:

Post Reply