DIY Table Saw Sled

Discuss topics related to the Mobile Workbench
Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

DIY Table Saw Sled

Post by Suso » Tue Nov 16, 2021 1:00 pm

Today I've started making the table saw sled that I'll use with the bench table saw and my new mobile workbench. I'm going to try to install two replaceable inserts that can be adjusted to the thickness of the saw blade we'll be using.


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Wed Nov 17, 2021 2:31 pm

First steps to make my new table saw sled. I've used trailer floor plywood for the base of the sled and the same aluminum profile that I used in the sliding carriage.


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Fri Nov 19, 2021 12:50 pm

Work in progress! I've changed the original design a little and I'm going to place another replaceable insert in the aluminum profile fence at the exit point of the cut. It will allow me to swap the insert to use discs with more or less thickness.


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Mon Nov 22, 2021 1:58 pm

Adjusting the inserts of my new table saw sled to the thickness of the blade. Now it's time to make some cuts to see how they work!


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Wed Nov 24, 2021 1:44 pm

A short video to show you how to adjust the inserts in my new table saw sled. Once adjusted, cutting barely causes any splintering, not even in a material as sensitive as a chipboard with melamine!


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Thu Nov 25, 2021 3:33 pm

Just posted on Youtube the seventh video where I'll show you how to build the table saw sled with adjustable zero clearance that I'll be using with my new mobile workbench with a bench table saw.


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Fri Nov 26, 2021 12:35 pm

I've edited this short video to show off some of the possibilities offered by T-track profiles and clamps to make several kinds of cuts along with my new table saw sled. Full video on my Youtube channel 🔥🔥


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Tue Nov 30, 2021 3:05 pm

Just like with the sliding carriage, with the table saw sled I can also use an attachment so that I can extend the miter track stop and cut larger workpieces. This attachment is reversible and can be used both on the left and on the right of the profile fence. I can also use the larger one I made some days ago for the sliding carriage.


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Fri Dec 03, 2021 1:23 pm

Another interesting possibility of my new table saw sled is to use it with a dado blade to make rabbets. I only need to adjust the inserts of the base to the thickness of the blade and change the aluminum profile fence's wooden insert. To use it as a fence insert, I can use any kind of board that's 15mm thick. It will allow me to cut, for example, wooden tenons.


Suso
Posts: 2233
Joined: Thu Oct 22, 2015 4:51 pm

Re: DIY Table Saw Sled

Post by Suso » Fri Dec 10, 2021 4:49 pm

My new table saw sled will also allow me to make box joints. Both with the same dado blade or with a normal blade. However, I think it's a little dangerous to make these sorts of joints this way, and I'm thinking of making a jig to mount on the sled and make box joints in a faster and safer way.


Post Reply