Diy Blast Gate Box for the Workbench

Discuss topics related to the Mobile Workbench
Post Reply
Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Diy Blast Gate Box for the Workbench

Post by Suso » Wed Sep 29, 2021 12:50 pm

This is the blast gate box that I'll be using with my new mobile workbench. The box has a main 100mm dust hose and two secondary 63mm hoses connected to a blast gate, one for the table saw and another that goes straight to the router table cabinet:


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Diy Blast Gate Box for the Workbench

Post by Suso » Thu Sep 30, 2021 1:19 pm

I've almost finished the blast gate box. I still need to screw the gates and place the box in the workbench.


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Diy Blast Gate Box for the Workbench

Post by Suso » Fri Oct 01, 2021 1:32 pm

Just posted on Youtube the fourth video in a five-part series where I'll show you how to build the blast gate box that I'll be using with my new mobile workbench.


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Diy Blast Gate Box for the Workbench

Post by Suso » Thu Oct 07, 2021 3:11 pm

Short video to show you the homemade blast gate box for my new mobile workbenh. I’m going to run a few tests to see how well it works.


Post Reply