Table Saw Outfeed Table

Discuss topics related to the Mobile Workbench
Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Table Saw Outfeed Table

Post by Suso » Wed Oct 27, 2021 2:27 pm

Today I started building the table saw outfeed table, which I'll install in the back of my new workbench. I'll use folding shelf brackets to allow the table to fold.


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Table Saw Outfeed Table

Post by Suso » Fri Oct 29, 2021 1:19 pm

I've finished making the frame for the outfeed folding table. I've also screwed the folding shelf brackets to the bench. They will allow me to fold the table when I'm not using the workbench. So far everything is going to plan!


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Table Saw Outfeed Table

Post by Suso » Wed Nov 03, 2021 2:30 pm

I've almost finished the outfeed folding table for the table saw. After make sure the table is level and at the same height as the rest of the benchtops, I've finished tightening the screws that hold the folding brackets to the back of the bench. 🔥🔥


Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Table Saw Outfeed Table

Post by Suso » Fri Nov 05, 2021 1:35 pm

Just posted on Youtube the sixth video where I'll show you how to build the outfeed folding table that I'll be using with my new mobile workbench with a bench table saw.


jvdheuvel
Posts: 21
Joined: Wed Oct 13, 2021 11:04 am

Re: Table Saw Outfeed Table

Post by jvdheuvel » Fri Nov 05, 2021 7:20 pm

I was more than happy to see that you posted the sixt video about the workbench…. And then I found out you are going to make two more video’s (sixt video of eight in total)….

May I ask what these video’s will be about?

You als menioned you are going to make a new fence for the table saw…. I’m curious what that will be like

Looking forward to seeing your new video’s

Keep up the great work! 👍🏻

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Table Saw Outfeed Table

Post by Suso » Sat Nov 06, 2021 3:10 pm

hi mate,
I wanted to make 6 videos, but as the project progressed I realized that it would be impossible to summarize all this work in 6 videos.
I am going to upload a new video showing how to make the table saw sled, and one more demo video to show all that this bench can offer.

The video about the new table saw fence will take a few months, I still have to design it!

Al_Brassell

Aluminum Extrusion

Post by Al_Brassell » Sat Nov 06, 2021 3:16 pm

Suso,

where can I get the aluminum extrusion you use as as the miter gauge on your sliding table?

Thanks,
Al Brassell

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Re: Aluminum Extrusion

Post by Suso » Sat Nov 06, 2021 3:21 pm

hi Al
I'm glad to hear from you again!

Here you'll find several links to find the aluminum profile:

jvdheuvel
Posts: 21
Joined: Wed Oct 13, 2021 11:04 am

Re: Table Saw Outfeed Table

Post by jvdheuvel » Sat Nov 06, 2021 6:44 pm

You can also check AliExpress or Banggood for these kind of items…. Much of the items that are available on Amazon have there original vendors in China… 😉

Al_Brassell

Re: Table Saw Outfeed Table

Post by Al_Brassell » Sat Nov 06, 2021 9:02 pm

Thank you mano

Post Reply